Operation Manual

34
ANSWERING MACHINE SETUP
ANSWERING MACHINE
SETUP
Selecting the answering machine
language
You can choose the language of your
answering machine. The messages will be
played back in the language you select.
Press the key on the base.
Repeatedly press the key until "L1" or
"L2" or "L3" is shown on the base display.
Press the key to validate.
Repeatedly press the key to select the
desired language.
• L1: English
• L2: French
• L3: German
Press the key to validate.
After an initialisation phase the display
returns to standby mode.
Modifying the remote access
code
The remote access code allows you to
consult the messages on your answering
machine by means of another telephone.
By default, the code is "0000". To change this
code, use the following procedure:
Press the key.
Press the key until "rC" is shown on
the base display.
MENU
MENU
You will hear the following message: PRESS
OK TO CHANGE ACCESS CODE.
Press the key.
The display shows :
• The lefthand figure indicates that you will
be entering the first figure of the remote
access code.
• The righthand figure shows the first
figure of the remote access code.
Use the keys to select this first
figure.
Press to go to the second figure.
The display shows :
• The lefthand figure indicates that you will
be entering the second figure of the
remote access code.
• The righthand figure shows the second
figure of the remote access code.
Use the keys to select this
second figure.
Press to go to the third figure.
The display shows :
• The lefthand figure indicates that you will
be entering the third figure of the remote
access code.
• The righthand figure shows the third
figure of the remote access code.
Use the keys to select this
third figure.
Press to go to the fourth figure.
LU 252117222C_D20V_EN.book Page 34 Mercredi, 24. août 2005 11:46 11