Operation Manual

21
HANDSET SETTINGS
Modifying the date and time
On the navigator key , press  or  until
the HS SET screen is displayed, press OK to
confirm.
Select DATE-TIME using  or . Press OK.
Enter the date in DD/MM format then the time
in HH/ MM format and press OK.
To exit the menu, press the red key .
Modifying the voice box number
A default number for your voice messaging
service is set in the factory. To change this
number, proceed as follows:
On the navigator key , press  or  until
the HS SET screen is displayed, press OK to
confirm.
Select VOICE BOX NO using  or . Press
OK.
First, contact your service provider
who will give you all information
concerning the operation of your
voice mail.
To listen to your voice box in the idle
state, press and hold the key.
The programmed number is displayed on the
screen,
• The number is correct, press OK.
• To modify the number, press C to delete
the number. Enter the number. Press
OK.
To exit the menu, press the red key .
LU 252117222C_D20V_EN.book Page 21 Mercredi, 24. août 2005 11:46 11