Operation Manual

16
In case of a mistake, press C to erase one
character at a time.
Once you are done making your changes,
press OK.
The number input screen appears.
Now, enter the name of your contact using
the keypad keys.
To enter a pause mode during dialling, press
the  key lengthily.
In case of a mistake, press C to delete the
last digit.
Once you are done making your changes,
press OK.
A new entry is created. It appears in the
directory list.
Editing an entry
On the navigator key , press  or  until
the DIRECTORY screen is displayed, press
OK to confirm.
Select EDIT using  or . Press OK.
Select the entry you want to edit using  or
. Press OK.
You enter the name input screen. The cursor
is at the end of the name.
• The information is accurate. Press OK.
• To correct the name, press C key to
delete characters. Make your corrections
using the keypad keys by pressing
successively on the corresponding keys.
Once you are finished, press OK.
You enter the number input screen. The
cursor is at the end of the number.
• The information is accurate. Press OK.
• To correct the number, press C key to
delete the numbers. Enter the new
number and press OK.
To exit the menu, press the red key .
Deleting an entry
On the navigator key , press  or  until
the DIRECTORY screen is displayed, press
OK to confirm.
Select DELETE using  or . Press OK.
Select the entry you want to delete using 
or . Once you have selected it, press OK to
confirm.
A confirmation screen asks you if you wish to
delete the entry.
• If you do not wish to delete the entry,
press C key.
• To delete the entry, press OK. The entry
is deleted from the directory.
To exit the menu, press the red key .
YOUR DIRECTORY
LU 252117222C_D20V_EN.book Page 16 Mercredi, 24. août 2005 11:46 11