Operation Manual

15
HANDSET SETTINGS
Activating or deactivating the
beeps
On the navigator key , press  or  until
the HS SET screen is displayed, press OK to
confirm.
Select BEEPS using  or . Press OK.
Select the beep type using  or  . Press OK .
KEYPAD PRESS: the handset beeps when a
key is pressed.
BATTERY LOW: the handset beeps when
the battery is too low.
OUT OF RANGE: When the base station is
out of range, the handset will warn you
acoustically.
An information screen displays the beep
status (ON or OFF) for the selected item.
• To change the status, press  or .
Press OK.
• To keep the status, press C.
To exit the menu, press the red key .
Modifying the default handset
melody volume
On the navigator key , press  or  until
the HS SET screen is displayed, press OK to
confirm.
Select MELODY VOL using  or . Press
OK.
There are seven alternatives in succession to
choose from: :
• VOL OFF : No ringing tone.
• VOLUME : X : From 1 to 5.
• CRESCENDO : The volume of the ring
tone increases with every ringing
sequence.
Press  or  to increase or decrease the
default volume. Once the volume is set,
press
OK .
To exit the menu, press the red key .
Modifying the handset ringtone
This menu enables you to associate a
ringtone to incoming calls or internal calls
(intercom).
On the navigator key , press  or  until
the HS SET screen is displayed, press OK to
confirm.
Select EXTERNAL CALL or INTERNAL
CALL using  or . Press OK.
Select the desired ringtone using  or .
Press OK.
To exit the menu, press the red key .
Setting the ear volume
During communication, you can
increase or decrease the audio
volume of your handset by pressing
the
 or  key on the navigator.
HANDSET SETTINGS
LU 251619615_D20T_GB_SAGEM.book Page 15 Jeudi, 26. août 2004 4:54 16