Operation Manual

D16V/D18V/D21V
- 19 -
11.3. Modifying the outgoing message (OGM)
11.3.1. Recording a personal outgoing message
1. Press . Select "ANSw machine " using the  or key, press .
2. Select "record ogm" using the or key, press
.
3. Select "answ. & record" or "answer only" using the or key, press
.
4. Select "record ogm" using the or , press
.
5. Clear state your announcement close to the base.
6. At the end of your announcement, press
. A confirmation beep is issued.
If you make a mistake while recording the announcement, repeat the operations described
above until you are satisfied with your announcement.
Note!
The maximum recording duration for an announcement is 120 seconds.
The recording start and end beeps are not part of your announcement.
Note!
The recording of a new announcement will automatically replace the previous
announcement.
11.3.2. Playing outgoing message
1. Press . Select "answ machine " using the or key, press .
2. Select "record ogm" using the or key, press
.
3. Select "answ. &record." or "answer only" using the or key, press
.
4. Select "play" using the or key, press
.
The announcement that will be used is broadcast.
After broadcasting the announcement, your answering machine will return to standby
mode.
Note!
If no announcement is recorded, you will hear a beep.
11.3.3. Delete your personal outgoing message
Note!
If you have not saved a personal announcement, the answering machine will
automatically use one of the pre-recorded announcements.
1. Press
. Select "answ machine "using the or , press .
2. Select "record ogm" using the or key, press
.
3. Select "Answ. &record" or "answer only" using the or key, press
.
4. Select "delete" using the or key, press
.
The anonymous announcement corresponding to the current answering machine mode
(simple/recorder) is automatically played.
At the end of the playback, the announcement is deleted and you are back to the previous
menu.