Operation Manual
1817
ENGLISH
7.6. Source edit
7.6.1. Scart sources auto
If the function is enabled, the wake up of your SCART connected device will wake up the TV, or switch to the
adapted SCART. If the function is disabled you have to operate manually.
7.6.2. Naming
Press to start naming.
Press to choose characters and numbers.
Press to select next digit
Press Menu to exit and save.
SCART SOURCES AUTO
NAMING
SOURCE ENABLE/DISABLE
PIP/PAP
VIDEO NOISE REDUCTION
: SELECT : ADJUST
: EXIT OSD
MENU
O
ff
Option Function
SCART SOURCE AUTO When the position is on, the LCD TV wake up is driven by the AV device connected to one of the SCART
plugs.
NAMING Rename these ports (see § 7.6.2.).
SOURCE ENABLE/DISABLE Some sources can be disabled. When disabled, they can no longer be selected with P+/P- (see § 7.6.3.).
VIDEO NOISE REDUCTION Puts a Video Noise Reduction filter (see Chap 7.6.4.)
PIP/PAP Enables configuration of the PIP/PAP mode. In PIP mode, one picture is displayed in full screen mode, while
another picture is displayed in a window.
SCART1
SCART2
SCART3
AV4-S
COMPONENTCOMPONENT
VGA
DVI
AV4
SCART1
SCART2
SCART3
AV
SVIDEO
YPBPR
VGA
DVI
: SELECT : ADJUST
: RETURN
MENU
7.5.3. Program edit
7.5.4. Sort
Select a channel in the list with .
Move this channel with .
Validate with
.
You can delete the channel, after selecting it, by pressing the MENU button.
PROGRAM NUMBER
FINE TUNE
SKIP
SAVE
B/G
NO
VIDEO NOISE REDUCTION
1
55.25MHZ
: SELECT : ADJUST
: RETURN
MENU
O
ff
Option Function
PROGRAM NUMBER Press - / or +/ to select a channel number.
FINE TUNE Press - / or +/ to adjust the frequency for the channel.
The colour point helps you to obtain the best results:
– red : bad
– yellow : middle
– green : good
SKIP Select YES to Skip the channel from the channel list.
VIDEO NOISE REDUCTION Enables you to set Noise Reduction. Video Noise Reduction reduces the screen noise that comes from
video. Choose OFF, LOW, MIDDLE and HIGH can decrease the screen noise. It may cause freeze-frame
by choosing the MIDDLE or HIGH function.
SAVE Save your settings.
1. TF1
2. FR2
3. FR3
5.
6.
7.
8.
4.
9.
10.
11.
13.
14.
15.
16.
12.
: SELECT : ADJUST
: RETURN
MENU
1. TF1
2. FR2
3. FR3
5.
6.
7.
8.
4.
9.
10.
11.
13.
14.
15.
16.
12.
: SELECT : ADJUST
: DELETE
MENU
Anglais LU 27 A5.qxd 15/12/2004 10:08 Page 17