Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology

5 - Information / Configuration
SAGEM F@stâ„¢ 2604/2644 Reference Manual - 253080888-A
Sagem Communications document. Reproduction and disclosure prohibited Page 5-43
Field Meaning
Server Name
Select a Service
Service available over Internet (such as, for example FTP Server,
SNMP, TFTP etc.).
Custom Server
Name you want to allocate to a local server.
External Port Start
Internal start port (WAN side).
External Port End
Internal end port (WAN side).
Protocol
Transport protocol (TCP, UDP or TCP/UDP).
Internal Port Start
Internal start port (LAN side).
Internal Port End
This internal end port (LAN side) is associated with the external
end port (WAN) side.
Note: This cannot be modified.
Server IP Address
Computer address delivered by your router's DHCP server.