Installation guide

5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Sagem Communications document. Reproduction and disclosure prohibited Page 5-37
Field Meaning Default
RTS Threshold
The RTS/CTS protocol (Request To Send / Clear
To Send) is used to reduce the probability of
collisions between stations.
Note: As packet size is set by default to 2346,
the RTS/CTS protocol is inhibited as its
value is set by default to 2347.
Enter a threshold value (in bytes) between 1 and
2347.
2347
DTIM Interval
The DTIM counting area (Delivery Traffic Indication
Message) enables Wi-Fi clients to listen to
broadcast and multicast messages saved in your
router's "Buffer" memory.
Enter an interval value (in seconds) between 1
and 255.
1
Beacon Interval
Enter a time interval value between two beacon
signals which shows the activity of the wireless
network.
This interval value (in milliseconds) is between 1
and 1000.
100
Maximum Associated
Clients
Enter the maximum number wireless customers
for your router.
128
XPress
TM
Technology
From the scroll down list, select Enabled to apply
the "XPress
TM
" technology or Disabled to not
apply it.
Disabled
54g
TM
Mode
In the scroll down list, select (54g Auto, 54g
Performance, 54g LRS or 802.11b Only)
54g Auto
54g Protection
Select Auto to improve the quality in the mixed
802.11 environments (g and b for example) or Off
to improve the quality only on the 802.11g
environments but degrade it on other
environments (802.11b for example).
Auto