Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-18 Sagem Communications document. Reproduction and disclosure prohibited
Shared
Object: This level of security enables users of the Wi-Fi network to be authenticated using
their SSID or their WEP key.
In this authentication mode, the WEP key is used to encrypt data.
• Select the "Shared" security from the scroll down list; the following screen appears:
Field Action Default
WEP Encryption
Note: This field is always active (Enabled).
Enabled
(non modifiable)
Encryption Strength
See subsection 5.7.1.2 - WEP.
128-bit
Key Phrase
See subsection 5.7.1.2 - WEP.
Empty
Current Network Key
See subsection 5.7.1.2 - WEP.
2
Network Key x (1 to 4)
See subsection 5.7.1.2 - WEP.
Empty