Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Sagem Communications document. Reproduction and disclosure prohibited Page 5-3
3
Your computer's Web browser opens and displays the router's welcome screen.
The equipment's name is displayed in title (SAGEM F@st
TM
2604 or
SAGEM F@st
TM
2644).
Equipment configuration sections appear in the left hand side of the welcome
screen.
This screen displays:
) in the centre, an area which shows the current ADSL connection status (see
subsection 5.3).
) in the top right, a display box which lets you know the status of the ADSL line, lets you
refresh the window displayed and restart your router at any time (see subsection 5.4).
) to the left, a list of 7 sections (see subsection 5.5 to 5.11) made up of menus and sub-
menus. These let you view and configure your router's parameters.
You can modify the password to access your router's configurer to optimise the
safety of your network.