Installation guide

4 - Configuration of network parameters
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 4-4 Sagem Communications document. Reproduction and disclosure prohibited
2) Status of the DHCP server
To obtain this status:
• Open your browser and then enter http://myrouter
or http://192.168.1.1 (default
IP address of your Residential Gateway) to access the welcome screen,
• Enter "admin" in the "User Name" field (see note).
• Enter "admin" in the "Password" field (see note).
• Then click on the "OK" button to validate.
Note: This value depends on the level of security. The ISP gives users this one.
• Click the "LAN" menu of the heading Advanced Setup; the following screen appears:
Field
Meaning Display
IP Address
Displays the sub-network address 192.168.1.1
Subnet Mask
Displays the sub-network mask of the IP network. 255.255.255.0
Start IP Address
Displays the first address attributed by the DHCP
server.
Note : This IP address must belong to the same
sub-network as that of the local network.
192.168.1.2
End IP Address
Displays the last address attributed by the DHCP
server.
Note : This IP address must belong to the same
sub-network as that of the local network.
192.168.1.254
Leased Time (hour)
Displays the period for obtaining (in hours) an IP
address for a terminal.
24