Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
Annex D - Technical Characteristics
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page D-6 Sagem Communications document. Reproduction and disclosure prohibited
D.4 Application and protocols
IP characteristics
TCP-IP, UDP, ICMP, ARP
• Server, Relay
DHCP
• Relay
DNS
Routing (LAN et WAN)
• Static
NAT / PAT
• RFC 1631
Firewall
• Par protocole
• By IP address
• By port
• Statefull / Stateless
IP QoS
• DiffServ
ATM charactéristics
Signalling
• PVC
Adaptation layer
• AAL5
Number of VCI
• 8
Quality of service
• UBR, VBR, nrtVBR, VBRrt, CBR
Signalling
• RFC 2516
self-configuration
• Detection of VPI/VCI
• Detection of encapsulation
• Detection of PPPoE / PPPoA
• Detection of PAP / CHAP
Encapsulation protocols
PPP over ATM
• RFC 2364
PPP over ETH over ATM
• RFC 2516, RFC 1483/2684
IP over ATM
• RFC 1483/2684
ETH over ATM
• RFC 1483/2684