Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
Annex D - Technical Characteristics
SAGEM F@st™ 240x/244x Reference Manual - 288097371-02
Sagem Communications document. Reproduction and disclosure prohibited Page D-3
D.2 Characteristics of the different interfaces
ADSL / ADSL2 / ADSL2+ Interface
Standards supported
• G.992.1 (ADSL), G.992.3 (ADSL2), G.992.5 (ADSL2+),
• G.994.1 (G.Handshake)
Transmission Code
• DMT
Maximum upward
transmission rate
• 24,5 Mbit/s
Maximum downward
transmission rate
• 1,3 Mbit/s
Latence
• Simple (Fast ou interleaved)
TX Power
• 12,5 dB
Access Impedance
• 100
Ω
Range
• According to standard G.992.1 table Annexe G
Connection technology
• RJ11
Interface LAN Ethernet
Rate
• 10 Mbit/s or 100 Mbit/s, self-configurable
• Half / Full Duplex
Standard
• IEEE 802.3
Connection technology
• RJ45
• Type MDI or MDI-x self-detecting port
• Crossed or straight cord