Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
7 - TV over ADSL service
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 7-2 Sagem Communication document. Reproduction and disclosure prohibited
7.1 Introduction
Your router is compatible with TV over ADSL technology.
7.2 Access to the optional TV over ADSL service
To access this service, you must have:
¾ made the connection in accordance with section 2.2.4,
¾ necessarily taken a subscription with your Internet Service Provider (ISP).
¾ configured one VC (Virtual Channel) dedicated to video, and another VC dedicated to data
(see screen below).
Note: In the example above, the ATM interface "ppp_8_35_1" is dedicated to data and the
ATM interface "nas_8_50_1" is dedicated to video.
¾ configure "Port Mapping" in accordance with section 6.9.8.