Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-150 Sagem Communications document. Reproduction and disclosure prohibited
5.11.7 Update Software
Object: This menu lets you update the latest version of the router software.
• Select the Update Software menu in the Management section to display the following
screen:
Proceed as follows to update your router's software version:
• Enter the path then the name of the software version file,
or
• Click on the Browse button and select the path then the software version file,
• Click on the Update Software button to update the software version.
The process takes around 2 minutes.
The application of a new software version for the router does not modify the
current configuration at all.
Throughout the download procedure (up to five minutes), you must:
• not power down the router,
• not disconnect from the ADSL line.