Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-138 Sagem Communications document. Reproduction and disclosure prohibited
Field Action Default
Log
Select Enable to activate the saving of all the
events to a log and display on screen or
Disable to deactivate.
Enable
Log Level
Select the appropriate severity from the scroll
down list. All the events with this severity, or a
higher severity, will be saved to your router's
volatile "flash" memory.
The severities are classified in decreasing
order of importance.
• Emergency,
• Alert,
• Critical,
• Error,
• Notice,
• Informational,
• Debugging.
Debugging
Display Level
Select the appropriate severity from the scroll
down list. All the events with this severity, or a
higher severity, can be viewed by pressing the
"View System Log" button.
The severities are classified in decreasing
order of importance.
• Emergency,
• Alert,
• Critical,
• Error,
• Notice,
• Informational,
• Debugging.
Error