Installation guide

5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-112 Sagem Communications document. Reproduction and disclosure prohibited
Field Meaning Default
Group Name
Enter a name which represents the service
you want to associate with a desired interface
(for example "video_eth" if you want to
associate the TV over UP service with the
interface (Ethernet)).
_
Grouped Interfaces
Displays the interfaces associated with a
service you selected in the "Available
Interfaces" area then transferred with the
button.
_
Available Interfaces
Lists all your router's interfaces.
Note: Only the "nas_8_50" interface is not
resident on the router. It corresponds
to a "Bridge" ATM interface.
_
Used to transfer the interfaces selected in the "Available Interfaces" area to the
"Grouped Interfaces" area.
Used to transfer the interfaces selected in the "Grouped Interfaces" area to the
"Available Interfaces" area.
Field Meaning
Automatically Add
Clients with the DHCP
Vendor IDs
This functionality allows to recognize the equipment
connected to a port and to automatically affect this port to it.
To do that, the router receives from this equipment (for
example a decoder TV) a DHCP request which contains a
client specific identification (Vendor ID).
Note: As soon as this assignment is carried out, it becomes
permanent.
Example
If you want to associate the "Video" service with the Ethernet interface:
¾ in the "Group Name" area enter a representative name such as "video_eth".
¾ in the "Available Interfaces" area select ENET4 for the Ethernet interface.
¾ then click on the
button to transfer this interface to the "Grouped Interfaces" area.
¾ in the "Available Interfaces" area select the ATM nas_8_50 interface associated with the
ATM "br_8_50" service ("Bridge" protocol) created earlier using the Advanced Setup / WAN)
menu.
¾ then click on the
button to transfer this interface to the "Grouped Interfaces" area.