Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Sagem Communications document. Reproduction and disclosure prohibited Page 5-103
5.9.6 DNS
5.9.6.1 DNS Server
Object: This menu enables the automatic resolution of domain names by polling remote
servers.
• Select the DNS menu in the Advanced Setup section to display the following screen:
Field Action Default
Enable Automatic
Assigned DNS
Check the appropriate box to allocate a
domain name address.
Box checked
Primary DNS server
12
Enter a primary DNS server address.
_
Secondary DNS server
12
Enter a secondary DNS server address.
_
12
This field only appears when the "Enable Automatic Assigned DNS" field is deactivated (box not checked).