Installation guide
Table Of Contents
- SAGEM F@stTM 2604 SAGEM F@stTM 2644
- 1. Introduction
- 2. Description and connection of router
- 3. Installing and configuring the SAGEM F@stTM 2604/2644 router
- 4. Configuration of network parameters
- 5. Information / Configuration
- 5.1 Accessing the welcome screen
- 5.2 Recommendations
- 5.3 ADSL connection status
- 5.4 Display frame
- 5.5 Status
- 5.6 Internet Connection
- 5.7 Wireless
- 5.8 NAT
- 5.9 Advanced Setup
- 5.10 Advanced Status
- 5.11 Management
- 6. Internet access service
- 7. TV over ADSL service
- 8. Updating the firmware
- A. Annex A - Troubleshooting
- B. Annex B - Warnings for safety
- C. Annex C - Environment
- D. Annex D - Technical Characteristics
- E. Annex E - Default configuration
- F. Annex F - Glossary
- G. Annex G - Connector Technology
5 - Information / Configuration
SAGEM F@st™ 2604/2644 Reference Manual - 253080888-A
Page 5-92 Sagem Communications document. Reproduction and disclosure prohibited
Add
• Click on the Add button to display the following screen:
Field Action
Queue Configuration Status
Select from the scroll down list:
Blank :
Disable : To disable the QoS queue entry,
Enable : To enable the QoS queue entry.
Queue
Select from the scroll down list:
Blank :
8/35 : Interface name.
Queue Precedence
Select from the scroll down list:
Blank :
1 : High priority for this queue,
2 : Medium priority for this queue,
3 : Low priority for this queue.
Note : A high priority leads to low packet loss.