SAGEM F@stTM 2604/2644 Quick Installation Guide 252987009-A_GIR_2604-2644 (gb).
Contents 1 contents of the pack..................................................2 2 connection......................................................................3 2.1 Connecting your router............................................................... 3 2.2 Connecting additional telephones........................................... 3 3 INSTALLation from the CD-rom.................................4 3.1 Installation by Wi-Fi interface..................................................... 5 3.
SAGEM F@st™ 2604/2644 Sagem Communications thanks you for choosing from the SAGEM F@stTM 2604/2644 Routers’ range and hopes that it will provide you with full satisfaction. SAGEM F@stTM 2604 and SAGEM F@stTM 2644 products adapt the ADSL function respectively on POTS (ITU G.992.1/3/5 - Appendix A) and on ISDN (ITU G.992.1/3/5 - Appendix B). SAGEM F@stTM 2604 and SAGEM F@stTM 2644 equipment includes four Ethernet interfaces (ETH1 to ETH4).
SAGEM F@st™ 2604/2644 1 contents of the pack Before you begin installation make sure that the pack contains the following elements: Contents of the pack 252987009-A_GIR_2604-2644 (gb).
SAGEM F@st™ 2604/2644 2 connection 2.1 Connecting your router Make sure that the router is not connected to your computer before you start the installation from the CD-ROM. Connect the router as shown in the diagram below. Line Note: le ca b A «UK» mains adapter can be provided optionally as required. 2.2 Connecting additional telephones Connect the elements as shown in the diagram below. 252987009-A_GIR_2604-2644 (gb).
SAGEM F@st™ 2604/2644 3 INSTALLation from the CD-rom Make sure that the router is not connected to your computer before you start the installation from the CD-ROM. The installation procedure described below was undertaken in Windows VistaTM. Installation in other Windows® (98, ME, 2000 and XP) can be slightly different. insert the CD-ROM into the relevant drive; the screen opposite will appear: click on Next to display the precautions to be taken during installation.
SAGEM F@st™ 2604/2644 For a first installation, we advise you to select «You want to install your router modem for the first time» then click on Next to continue the installation. The screen opposite appears when you click on Next. This screen allows you to select the interface (Wi-Fi or Ethernet) you want to use to connect your router to your computer. How to install your router using different interfaces is detailed below in the order they appear in the previous screen (connection mode selection).
SAGEM F@st™ 2604/2644 USB Wi-Fi Adapter Follow the instructions provided by connecting the USB Wi-Fi adapter to your computer then configuring the Wi-Fi interface. The following Wi-Fi parameters must be entered: SSID, Security key. Note: The «WiFi security key» field only appears if WiFi security (WEP 128, WPA-PSK and WPA2-PSK) is assigned to your router. The length of this field depends on the selected WiFi security level. This «Wi-Fi» information is marked on your router.
SAGEM F@st™ 2604/2644 Once you have entered the configuration parameters, a window will appear showing the different stages of the installation. Once installation is completed, an «end of the installation» window will appear telling you that your router has been correctly installed. You may now access the Internet. Wi-Fi interface integrated into your computer Before you continue installing your router, you must first configure your computer’s Wireless Manager.
SAGEM F@st™ 2604/2644 3.2 Installation using the ethernet port You selected «Use the Ethernet cable», click on Next. Follow the instructions provided by plugging in the router supply, switching it on and connecting the ADSL line. Then connect your computer to one of the router’s four Ethernet sockets (ETH1, ETH2, ETH3 or ETH4) using the Ethernet cable. Once you have connected this equipment, an Internet connection screen appears. You must enter your connection ID then your connection password.
SAGEM F@st™ 2604/2644 3.3 Installation of an additional computer Your router is already connected insert the CD-ROM into the relevant drive. Follow the installation guide up to the «installation selection» window and select «You want to install an additional computer». Click on Next to continue the installation. The «interface selection» window which is identical to the first installation appears.
SAGEM F@st™ 2604/2644 4 troubleshooting Users can locate the fault using the following sources: Status of the LEDs on the front, Information accessible by your router’s built-in «DSL Router» HTTP controller, Router supervision, «Diagnostics» tools. 4.
SAGEM F@st™ 2604/2644 4.3 router supervisiON This is displayed permanently in a box at the top right of each window in the HTTP configuration tool. To access the configuration tool: open your browser then enter the following in the address bar: the following URL : http://myrouter, or the following address : http://192.168.1.1 (see note). A “Login” window appears. enter admin in the «Username» field (see note). enter admin in the «Password» field (see note).
SAGEM F@st™ 2604/2644 Buttons Update the data displayed on the screen Reboot your router 4.4 «Diagnostics» tool To access this tool: open the configuration tool (see the router supervision section). select the “Status” heading then the “Diagnostics” menu in the relevant list located in the left of each window. The following screen will appear: Troubleshooting 252987009-A_GIR_2604-2644 (gb).
SAGEM F@st™ 2604/2644 The result of the tests carried out by your router’s «DSL router» configuration tool is displayed in the «Diagnostics» window. These tests relate to the connections to the LAN, your DSL Service Provider and your Internet Service Provider (ISP). A hypertext link (help) enables the user to access contextual help. This help provides explanations about the status of the connection (PASS green, DOWN orange and FAIL red) and provides the appropriate repair procedures.
SAGEM F@st™ 2604/2644 5 Safety instructions Environment The router should be installed and used inside a building. The room temperature should not exceed 45ºC. The router can be placed on a desktop or fixed vertically in its wall mounting. The router should not be exposed to strong sunlight or placed near a substantial source of heat. The router should not be placed in an environment where it would be subjected to considerable steam condensation.
SAGEM F@st™ 2604/2644 5 safety instructions (contd.) Safety level Primary power source access Bipolar AC mains socket HPV (Hazardous Primary Voltage circuit) DC power supply access Miniature fixed connector (PWR) SELV (Safety Extra Low Voltage) RJ45 Ethernet access (ETH1 to ETH4) SELV RJ11 line access (LINE) TNV3 (Telecommunication Network Voltage level 3 circuit) The product named SAGEM F@st™ 2604 or SAGEM F@st™ 2644 can be operated indoors in the European Union without restrictions.
SAGEM F@st™ 2604/2644 Notes:_____________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ ___________________________________________________________ _________
For futher information on our products, Please visit our Web site at: www.sagem.com 252 987 009 ed. A 3 000 315 594 R11 000 01 Siège social : 27, rue Leblanc - 75015 Paris - France Tél. : +33 (0)1 58 11 77 00 - Fax : +33 (0)1 58 11 77 77 http://www.sagem-communications.com Société Anonyme au capital de 167 038 185 euros - 440 294 510 RCS Paris 252987009-A_GIR_2604-2644 (gb).
