User's Manual

Messaging 27
Note:
- You may change to capital letter, small letter or 123 (digit) mode at any time by
pressing and releasing the key.
- You may also obtain the digits by pressing and holding the key you want.
- Changing the language in T9 mode: press and hold the key.
Using another mode
To deactivate T9 mode press and hold the key. The ABC mode then applies:
each time you press a key this corresponds to the letters indicated on the key (for
example, press the
2 key twice to display B).
As in T9 mode, you may change to capital letter, small letter or 123 (digit) mode at any
time by pressing and releasing the key.
Note: you may change mode by pressing [ Options ].
Punctuation characters
Punctuation characters are obtained by pressing the 1 key (except in 123 mode), or
with the help of
Insert mode (fast access by briefly pressing ).
Accented characters
Accented characters are generated automatically in T9 mode.
In ABC mode accented characters are available by pressing the key supporting the
non-accented character repeatedly.
Saving the message
- Exit the edit directly, the edited message is saved in the drafts automatically, it will
display when you enter next time.
- Select
Save as/Draft if you do not want to send the message immediately or if you
want to send it several times. It is saved in the
Drafts menu.
or
- Select
Save as/Template to use it again as a template. It is saved in the
Templates menu.
Sending the message
- Once the text is entered, press the navigator or press [ Options ] and select Send
to
.
- Enter the recipient’s number or take it from your phonebook by pressing [
Options ]
then selecting Contacts , you also can select a contacts list in your phonebook.