OT 8x0RF* Range English * OT8x0RF stands for OT860RF or OT890RF
Congratulations! You have just purchased a Sagem Wireless phone. It is recommended that you read this handbook carefully in order to use your phone efficiently and in the best conditions. This phone can be used internationally on the various networks [GSM 850 MHz, GSM 900 MHz, DCS 1800 MHz or PCS 1900 MHz] depending on the roaming arrangements with your operator. This phone is approved to meet European standards.
Contents Contents....................................................... 3 Description .................................................. 5 Installing the SIM card and the battery ...........6 Inserting the memory card ..............................8 Using the memory card...................................8 Idle screen ................................................... 9 Quick start ................................................. 11 Information on the SIM card..........................
Technical features..................................... 47 Certification and safety information for the United States and countries using FCC standards ................................................... 48 FCC Part 15 statement ................................. 48 Safety Information......................................... 48 Distance of operation.................................... 49 FDA consumer information on wireless phones49 Driving safety tips .........................................
Description Left programmable key - In idle screen: access to certain functions (shortcuts) - In the menus: access to the selection shown on screen in the tab Right programmable key - In idle screen: access to the general menu (shortcut) - In the menus: access to the selection shown on screen in the tab Green key - Long press (in call context): Hands-free mode (WARNING: do not use the phone in hands-free mode near to your ear, or you may suffer hearing loss) - Short press (in call context): Call/Reception
Alphanumeric keypad A long press on the key 1 calls voicemail (if the number has been stored in Settings/Calls/Voicemail menu) 1 2 to 9 A long press on one of the 2 to 9 keys immediately displays the phonebook Side keys - Access to the music player (long press) - Play or pause the music track (short press) Note: depending on your operator, this key may have another function Adjusting the volume (during a call or when playing music) Installing the SIM card and the battery WARNING Depending on the model, n
Make sure the phone is switched off and the charger not connected. 1 3 2 4 1 Turn the phone over and remove the back cover by raising the lower part first. 2 Remove the battery. 3 Slide the card right in under the holding plate, with the fold face down and the cut corner as shown on the phone drawing. Insert the battery by first positioning the top part with the connectors. 4 Put the back cover on again, by first clicking in place the top part.
Inserting the memory card - Remove the back cover. - Insert the memory card half-way in position as shown in the diagram above. Using the memory card The memory card is very fragile. Handle with care when you insert or remove the memory card. Some memory cards must be formatted with a PC before first use with the phone.
Idle screen The idle screen can display: At the top of the screen, the following icons: Battery (when flashing red, the battery must be charged at once) Silent mode (the ring tone is off) Emergency calls only Indicator showing the reception quality of the GSM or Wi-Fi network (from 0 to 5 bars) The phone is in an EDGE coverage area Message received (read your message), flashing: memory full (delete some messages) WAP connection In the main area of the screen, the following icons: Wi-Fi connection activated.
Date and time The name of the network operator The name of the Wi-Fi access point associated with the phone Note: Indications about the calls or messages or network messages may also be displayed. They can be erased by briefly pressing the red key.
Quick start Information on the SIM card To use your phone, you need a card called the SIM card. This contains personal information that you can change: - secret codes (PIN(s): Personal Identification Number), these codes allow you to protect the access to your SIM card and phone, - phone book, - messages, - operation of special services. WARNING This card must be handled and stored with care in order not to be damaged. If you lose your SIM card, contact your operator immediately.
Switching on/off To switch on your phone, do a long press on the red key until vibrating starts. When the phone is on and if you are browsing the menus, a short press on the red key will take you back to the idle screen. When you are in the idle screen, a long press on the red key will switch off the phone. Network Once it is switched on, the phone will search for a network on which it can communicate. If it finds a network, the name of this network is displayed on the screen.
Reception of a call When you receive a call, the number of your caller is displayed when it is presented by the network. Press the green key to answer, and speak. To reject the call, press the red key. To stop the ring tone or the vibration, without rejecting the call, press the key. Hands-free mode During a call, do a short press on the green key and then press [Yes] to confirm activation of the amplified mode. WARNING: in this mode do not bring the phone up to your ear.
Utilization Increasing the battery life of your phone - Do not press the keys unnecessarily: each key press activates the back lighting and uses additional battery power. - Do not obstruct the antenna with your fingers. - Refer to the installation recommendations for your Wi-Fi access point: preferably place it in a clear area away from load-bearing walls or metal screens; this will optimize the range of the Wi-Fi signal.
WARNING There is danger of explosion if the battery is not inserted correctly or if it is exposed to fire. Do not short circuit it. The battery does not have any part that you can change. Do not try to open the battery casing. Use only the appropriate chargers and batteries as shown in the phone manufacturer's catalog. The use of other types of chargers or batteries may be dangerous or invalidate the warranty. Used batteries must be disposed of in the appropriate places.
Phonebook Using the phone book Enter the Phonebook menu: the list of contacts is displayed if you already have contacts stored (if not, refer to §Storing a new contact). When you select a contact, an icon is displayed in the title bar: contact stored on the SIM card contact stored in the phone’s memory contact stored in fixed dial. For more details about activating this option, refer to PIN2 Code and Restricted contacts in the Security menu.
Contact options To display the various options, select a contact and press [Options]. See contacts To display the details of the selected contact. Call Call the contact. If several numbers are stored to the selected contact, select the correct number with the navigator up and down, select [Call] or press the Green key to start the call. Modify contact Modify what you want and validate then select Save once the modifications are complete. Send message To send an SMS or MMS to a contact (see Messages).
Add phone contact Store a new contact into the phone. Add SIM contact Store a new contact into the SIM card. My numbers You can create the entries corresponding to your own numbers in order to consult them when necessary. Select My numbers and validate. Enter the different details and validate. Mailing list A mailing list lets you group contacts together: this list can be used to send messages easily to all the contacts in the list. - In the phone book, select the Mailing list tab. - Press [Options].
Synchronize You can synchronize your phone book with your archives stored on your operator’s network, using the options offered by your operator with a GSM or GPRS connection from your phone. You can also synchronize your phone book with your archives stored on your computer. You just need to activate or configure the USB connection with your phone (see Settings/Connectivity). Add to the mailing list Lets you add a contact to a mailing list.
Messages The Messages menu groups the following types of messages: SMS and MMS. MMS (Multimedia Message Service) format lets you insert or attach audio content, images and other multimedia objects in your messages, which can even include several slides. MMSs are charged differently from SMS; contact your operator to find out the costs involved and how the service can be activated. Creating a text message (SMS or MMS) - Select Messages/Create Message. - Type in your text. The T9 mode is applied by default.
Accented characters Accented characters are generated automatically in T9 mode. In ABC mode accented characters are available by pressing the key supporting the non-accented character repeatedly. Saving the message - Once the text is entered, press [Options] and select Save if you do not want to send the message at once or if you want to send it several times. It is saved in the Drafts menu. or - Select Save as Template to use it again as a template. It is saved in the Templates menu.
Drafts When you store a written message, it is stored with the drafts. If you select a message and press the navigator, you can modify it. To send it, select a message, select [Options] then Send or press the navigator to read it, then [Options] and select Add recipient. Sentbox This menu is used to store all your sent messages if you activated Store sent messages in the Options menu (see page 22).
2. MMS The options available for MMS are: - Store sent msgs: we recommend that you keep this feature deactivated in order not to saturate the memory. - Retrieval mode: if you are in an area where reception quality is poor, it may be a good idea to select manual mode as this allows you to delay the retrieval. - Priority: selecting a priority for message sending. - Request delivery rep: request acknowledgement for message sending. - Period of validity: duration of message life on the network before routing.
Camera This menu lets you take photos and shoot videos and use them in numerous ways, for example: send them to another phone or an Internet address, store them, use them as wallpaper or screen saver. Taking a photo and saving it Possible settings before taking a photo Zoom: To activate the zoom, use the navigator (press up or down) or the side keys (+ or -). Note: If the zoom selected does not match the storage format, the photo is automatically saved in an appropriate lower format.
Emboss: used to modify a photo by assigning it a gray relief, Negative: lets you change a photo to a negative, Grey scale: lets you change a color photo to black and white, Contrast: lets you increase or decrease the contrast of a photo, Sharpen: lets you increase the contrast of a photo, Blur: lets you add unsharp masking to a photo, Sepia: lets you change the colors to sepia, Shape: lets you add a contour to the photo. Brightness: lets you increase or decrease the brightness.
My Documents The My Documents menu contains the folders of all the multimedia objects recorded with your phone and those you have downloaded (photos, videos, ring tones, etc.). There are two tabs that you can select by pressing the right or left of the navigator: - Phone (phone memory) - microSD™ (available if you have inserted a memory card in your phone). You can copy the multimedia objects from the card in your phone. To access the different options in each folder, press [Options].
Music - Long press: access to the Player - Short press: play or pause the music track Note: depending on your operator, this key may have another function This menu lets you listen to music tracks continuously as on a music player. If you do not have any tracks stored yet, use the WAP to download some or connect your phone to a PC (see Settings/Connectivity). Two tabs are displayed: Player and Library. Go to Library by pressing the right side of the navigator.
Playing your music tracks Player tab: This tab opens when you select a music track or a list of tracks to play. To access the different options, press [Options]: - Fast forward: used to fast forward the music tracks. - Play/Pause: plays/pause music tracks from the playlist. - Play options: used to play the music tracks one by one, continuously or at random. - Repeat options: lets you choose to replay a list again or not. - Equalizer: used to modify the treble and bass settings.
Browser WAP (Wireless Application Protocol): protocol that translates the Internet language into WML and HTML, which is understood by a phone. The WAP function enables connection to certain Internet sites. You can connect to sites to download to your phone ring tones, icons, animated screen savers, Java™ applications and videos. WAP menus The WAP navigator is under licence: The WAP navigator and the software included are the exclusive property of Openwave.
WAP disconnection To disconnect, press the red key. Disconnection happens automatically after a few seconds of inactivity if you forget to disconnect. This time is defined by the Disconnection timer setting. Wi-Fi When the icon is shown at the top of the screen, the WAP communication (or object download) will use the Wi-Fi network. Note: the WAP communication (or the downloading of objects) is faster on the Wi-Fi network than on the GPRS network.
Games You are the owner of a SAGEM cell phone that allows you to download applications and games that can run on your phone using the integrated Java™ engine. However, being able to receive applications that can come from anywhere implies a minimum awareness of the possible effects of such downloads. For this reason, we recommend downloading certified games or applications from sites such as those of your operator or from www.planetsagem.com.
Settings Phone Audio Vibrate This menu allows you to activate the vibration for calls. Ringtones This menu lets you associate a ring tone to different functions (call reception, message reception, alarm call). Profiles This menu allows you to switch to Silent mode. Silent mode can also be activated from the idle screen with a long press on the key. When the phone is in silent mode, the corresponding icon is displayed on the idle screen. In this mode, the ring tone will not ring, except for the alarm.
Screensaver This menu allows you to display an animation when the phone is in standby mode. Note: you can select screensavers from those available by default in the phone or from the images downloaded in My Documents. - No screensaver: select Normal screen. - Several screensavers randomly: select Slide Show. - A specific screensaver: select Multimedia. • Press [Select] on the name of the screensaver, this one will be selected. or • Press the navigator, the picture is displayed.
Date / Time Set Date/Time This menu lets you set the date and time on your phone. Automatic update This menu lets you select automatic update for the time and date (after a period of not using the phone or on a foreign trip for example) (this service depends on the operator). Select Automatic, Manual or On demand and validate. Time zone This menu lets you change the time in relation to GMT. Select the time of the country required by calculating this as regards GMT.
Connectivity You can swap various types of data with other devices (PC, mobile phones, PDAs, printers, etc.): images, sound, photos, videos, Todo tasks, Organizer, contacts, etc. Data exchange can be done using: - a USB cable, - a Bluetooth® connection. Wi-Fi Your phone can connect to a wireless LAN (Wi-Fi).
Bluetooth® Bluetooth® is a technology used to establish a wireless connection with other Bluetooth® equipped devices: for example, with a pedestrian kit or a car kit to phone or with a PC to swap data. The range is about 10m.
- Delete all: lets you delete all your devices. WARNING: you need to restart the pairing when this function is used. - Activate: used to activate the connection with the device. - Deactivate: used to deactivate the connection with the device. - Properties: used to display the device’s list of Bluetooth® services. Notes: - Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing this operation.
SyncML Two selections: - Network (OTA): you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your operator's network depending on the options offered by your operator with a GSM or GPRS connection from your phone. - Local: you can synchronize your phonebook, your organizer or your ToDos with your archives stored in your computer. Use the Wellphone software and configure your USB connection in your phone or activate Bluetooth®.
Calls The Calls menu allows you to manage all the call functions (call forwarding, number display, call waiting, voice mail number, etc.). Display numbers This menu lets you modify the status of the Display numbers function. Select one of the options proposed: Anonymous mode, My number, Caller’s number. Anonymous mode You can decide whether or not your phone number will be displayed on the phone of the person you call. - Preset: The network default mode.
Auto redial This menu lets you call back a correspondent you were unable to reach. Select one of the options proposed: Inactive, On request or Systematic. If you choose On request, your phone will offer to redial your caller automatically if his number is busy. Counters This menu displays the duration of the last voice calls. It can also be used to check the volume of the last data exchanged in GPRS. Call barring This menu allows you to block the sending or receiving of certain calls.
Voicemail This function is used to record your voicemail access number. This number will be used during a call to the voicemail using the programmable keys. Enter your voice mail number and validate. New number After an incoming or outgoing call with a number not stored in the phonebook, this option allows you to activate or deactivate a request to store the number in the phonebook. Call log This menu lets you access the list of the last numbers used.
Phone code The Phone code menu allows you to activate the phone code so that it is requested and checked whenever the phone is switched on if a different SIM card is used. This code is automatically linked to the SIM card installed when the phone is activated, for example to protect the phone if stolen. Select Activation and [Select]. Enter 0000 (the default factory code) and validate. Select Off or On and validate. To modify the phone code, select Modify and validate. Enter old phone code and validate.
The Clear costs menu (*) lets you erase the cost of the last call and reset the all totals counter after entering your PIN2. (*) WARNING Depending on the configuration of the network and associated subscription cards, certain functions may not be available (indicated by *). Networks This menu lets you configure your network preferences. Choose Selection to activate (automatically or manually) one of the networks accessible in the area in which you are located.
Games and Tools Time Manager Alarm This menu lets you set and activate the alarm. The alarm will ring even when the phone is switched off. The alarm icon appears on the idle screen. Timer This menu is used to set and activate the timer. The alarm icon appears on the idle screen. Chronometer This menu allows you to activate the stopwatch. Select Start to start timing, select Lap to record next time, 15 at most, select Stop to stop timing, select Menu/Start to resume, Menu/Reset to clear the time.
- Categories: allows you to view the different Todo categories, see the number of Todos in each category and display them. - Memory: displays the memory used by your Todo’s. Possible actions on a Todo: - To display a Todo, select it in the See List and press the navigator. - To display the different options, press [Options]. • Modify ToDo: lets you modify the Todo properties. • Delete: deletes the Todo. • Send by: lets you send the Todo by Message or Bluetooth®.
Press [Options] to use the following options: Rapid exchange If you activate the Quick exchange option, the converter will work in the idle screen when you enter the required digits and press navigator up or down to carry out the currency conversion. Exchange rate Enter the exchange rate for the two currencies selected. Currency Enter the labels for the two currencies to convert. Goto Calculator This option allows you to use the converted value directly in the calculator.
Technical features Weight: 89 g Size: 108 x 48 x 11 mm Original battery: Li-ion 880 mAh Battery life (*): - In communication: Wi-Fi deactivated: 4 h 10, Wi-Fi activated: 3 h 10 - In standby: Wi-Fi deactivated: 400 h, Wi-Fi activated: 220 h Multimedia objects supported: - Audio formats: iMelody, Midi, wave, MP3, AAC, AAC+, AMR NB, AMR WB - Graphical formats: bmp, wbmp, png, gif, animated gif, jpeg Size of memory available for messages: up to 1,000 Size of memory available for the phone book and multimedia ob
Certification and safety information for the United States and countries using FCC standards FCC Part 15 statement This device complies with part 15, part 22 and part 24 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference, including interference that may cause undesired operation.
Interference with personal medical devices: You should always consult your physician and review the device manufacturer's instructions to determine if operation of your phone may interfere with the operation of your medical device. As a general rule: - For pacemakers: Pacemaker manufacturers recommend that a minimum separation of 6 inches (15 cm) be maintained between a mobile phone and a pacemaker to avoid potential interference with the pacemaker.
What is FDA's role concerning the safety of wireless phones? Under the law, FDA does not review the safety of radiation-emitting consumer products such as wireless phones before they can be sold, as it does with new drugs or medical devices. However, the agency has authority to take action if wireless phones are shown to emit radiofrequency energy (RF) at a level that is hazardous to the user.
FDA and the Cellular Telecommunications & Internet Association (CTIA) have a formal Cooperative Research and Development Agreement (CRADA) to do research on wireless phone safety. FDA provides the scientific oversight, obtaining input from experts in government, industry, and academic organizations. CTIA-funded research is conducted through contracts to independent investigators. The initial research will include both laboratory studies and studies of wireless phone users.
Do wireless phone accessories that claim to shield the head from RF radiation work? Since there are no known risks from exposure to RF emissions from wireless phones, there is no reason to believe that accessories that claim to shield the head from those emissions reduce risks. Some products that claim to shield the user from RF absorption use special phone cases, while others involve nothing more than a metallic accessory attached to the phone.
NOTICE: This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. NOTICE: This device complies with Part 15 of the FCC Rules [and with RSS-210 of Industry Canada]. Operation is subject to the following two conditions: - this device may not cause harmful interference, and - this device must accept any interference received, including interference that may cause undesired operation.
Declaration of Conformity 54
Care and safety information Advice for limiting exposure to radiofrequency (RF) fields For individuals concerned about limiting their exposure to RF fields, the World Health Organization (WHO) provides the following advice: Precautionary measures: Present scientific information does not indicate the need for any special precautions for the use of mobile phones.
The physicochemical processes created by chargers impose temperature limits when charging the battery. Your phone automatically protects the batteries in extreme temperatures. Do not leave your phone within the reach of small children (certain removable parts may be accidentally ingested). Electrical safety Only use the chargers listed in the manufacturer’s catalogue. Using any other charger may be dangerous; it would also invalidate your warranty.
Using the music player This product has been designed to comply with prevailing legislation regarding the limitation of maximum audio volume levels. - Prolonged listening at high volume with a headset or earphones can damage your hearing. - If you experience ringing in your ears, reduce the volume or stop using the product. - Only use the headset or earphones supplied with the product or else use compatible accessories. The list of compatible accessories can be consulted on our Web site: http://www.
For customers in the United States LIMITED WARRANTY Sagem Wireless warrants this product including any accessories sold for use with the products against defects in materials or workmanship under normal usage for the periods outlined in the warranty provided with the product, as follows: DEAD ON ARRIVAL / OUT OF BOX FAILURE (DOA): This product is for standard consumer use only and guaranteed to be in proper working order as is determined upon initial removal from the package and subsequent power up and test
Limited Warranty The mobile phone and software program developed by Sagem Wireless remains the exclusive property of Sagem Wireless. YOU ARE STRICTLY PROHIBITED FROM MODIFYING, TRANSLATING, DE-COMPILING OR DISASSEMBLING THIS SOFTWARE PROGRAM OR ANY PART THEREOF. Sagem Wireless is responsible for all warranties for Sagem Wireless phones and accessories sold in the United States.
3. You are responsible for sending the phone to the repair center. In order to repair or replace a phone under warranty, Sagem Wireless also requires that a legible and unmodified purchase document, stating vendor's name and address, date and place of purchase, type of phone and IMEI (to display the IMEI on your phone's screen, type: *#06#), be attached to the warranty, and that the information on the phone identification label be legible and that such label or any other seal have not been tampered with.
7. Any questions or correspondence regarding this limited warranty should be addressed to: Sagem Wireless Attn: Sagem Wireless Warranty & Repair Services 2 Rue du petit Albi 95800 Cergy Saint Christophe These provisions are valid unless Sagem Wireless has made a special written agreement with the customer.
For customers outside the United States Warranty You must always use your phone for the purpose for which it was designed, under normal operating conditions. Sagem Wireless declines all responsibility for any use outside of the scope of its designed purpose and for any consequences of this use. The software program developed by SAGEM remains the exclusive property of Sagem Wireless. It is therefore highly prohibited to modify, translate, de-compile or disassemble this software program or any part thereof.
Expiry of the guarantee period of twelve (12) months stated above or three (3) months with effect from the date of support provided by Sagem Wireless. Your legal rights under the terms of applicable national law as well as your rights in relation to your retailer, as set out in the sales contract, remain applicable and are not in any way affected by this guarantee.
servicing fault, as described in the documentation supplied with the phone, to lack of supervision or care, to poor environmental conditions of the phone (especially temperature and hygrometry, effects of variations in electric voltage, interference from the mains network or earth) or even due to a repair, a call-out (opening or trying to open the phone) or to servicing done by personnel not approved by Sagem Wireless.
End User Licence Agreement (EULA), for the software CONTEXT AND ACCEPTANCE OF THE AGREEMENT You have acquired a Mobile Phone device ("DEVICE"), manufactured by Sagem Wireless (SAGEM), that includes software either developed by SAGEM itself or licensed third party Software suppliers ("SOFTWARE COMPANIES") to SAGEM with the rights to sub-licence it to the purchaser of the device.
through the SOFTWARE or third party applications that utilise the DRM. You therefore agree that, if you elect to download a licence from the Internet which enables your use of Secure Content, Suppliers may, in conjunction with such licence, also download onto your DEVICE such Security Updates that a Secure Content Owner has requested that SOFTWARE SUPPLIERS distribute.
USE OF THIS SOFTWARE IN ANY MANNER THAT COMPLIES WITH THE MPEG-4 VISUAL STANDARD IS PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO (A) DATA OR INFORMATION (i) GENERATED BY AND OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND (ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA, L.L.C. If you have questions regarding this Notice, please contact MPEG LA, L.L.C.
with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments. UPGRADES AND RECOVERY MEDIA - DEVICE Software.
Java™ When running a Java™ application, you may be prompted to grant access to protected features. These features are protected because using them could incur you cost, or involve your personal data. In case of doubt, don't hesitate to refuse access by selecting the "No" button! The security configuration menu is an expert feature! You must know exactly what you are doing before attempting to change security parameters of a MIDlet.
- Single confirmation: the user is prompted to grant access authorizations the very first time a protected function is used by a MIDlet. It remains valid until the MIDlet is removed from the handset. - Always: this security group grants access to the protected functions without conditions. A MIDIet can have two security states: "uncertified" or "certified". An "uncertified" status means that the source of the MIDlet could not be verified by the mobile phone at installation time.
In almost all cases, you will first receive a JAD file which will be displayed on the screen. When you select a JAD file, your mobile phone downloads it, displays data contained and prompts you to acknowledge the file download. The popup displays information below: Name of the MIDlet, Version, Size, Name, Security status, URL. If you do not want to download the main data (JAR file), you can refuse to acknowledge further airtime consumption by selecting "Cancel".
Troubleshooting Cannot switch on the phone - To switch on your phone, do a long press on the red key until vibrating starts. - If it still won’t switch on, the battery is probably completely discharged. - Connect the phone to the charger for between 5 and 30 minutes. The phone will switch on after being charged for a few minutes. - You can use the phone again when the Start option is displayed on the screen. - If the phone still won't start after 30 minutes of charging, please contact your customer service.
The network could be saturated. Try later. If the problem persists, please contact your customer service. Cannot receive calls Try to make a call in order to check that the phone and the network are operational. Check and deactivate the permanent call forwarding (permanent call forwarding icon displayed). Check and deactivate the incoming calls restriction when necessary. If the problem persists, please contact your customer service.
Customer care Customer Care e-mail address: OTsupport@sagemwireless.com Web Site: www.sagemwireless.
Index A Accessories Alarm Automatic redial 56 44 41 B Battery 14 Charging the battery 14 Installing battery 6 Bluetooth® 9, 17, 24, 25, 28, 35, 36, 45 Business card 18 C Calculator Call Call waiting Calls Anonymous mode Auto redial Blacklist Call barring Call forward Call log Call waiting Counters New number Voicemail Camera Chronometer Confidentiality Connectivity Contact Contacts Converter Index 45 12 41 39 39 40 40 40 39 41 39 40 41 41 24, 38 44 42 35 25 35 45 Cost Customer care 42 74 D Date / Tim
M Memory card Messages Creating a message Drafts Inbox Local info.
W Wallpaper Wi-Fi Index 32 9, 30, 35, 55 77
-
-
-
-
PC software, available as an option: To exchange data between your mobile phone and your PC: Pictures, Sounds, Video, SMS, MMS, Contacts, Calendar, etc To connect to the Internet easily Using the 3G, EDGE or GPRS networks according to your mobile phone capacities and your subscription Bluetooth® (*) IRDA (*) USB (*) For more information or to buy WellPhoneXT www.wellphone.com (*) See chapter ”Connectivity”, page 35 to view the links compatible with your phone.
01/2010 www.sagemwireless.com Sagem Wireless 38 Rue de Berri, 75008 Paris Capital 1 590 652, 10 € - 508 671 401 R.C.
