User's Guide
Table Of Contents
- Contents
- Description
- Idle screen
- Quick start
- Utilization
- Phonebook
- Messages
- Camera
- My Documents
- Music
- Browser
- Games
- Settings
- Games and Tools
- Technical features
- Certification and safety information for the United States and countries using FCC standards
- Declaration of Conformity
- Care and safety information
- For customers in the United States
- For customers outside the United States
- End User Licence Agreement (EULA), for the software
- Java™
- Troubleshooting
- Customer care
- Index
- www.sagemwireless.com
- Sagem Wireless
- 38 Rue de Berri, 75008 Paris
- Capital 1 590 652, 10 ı - 508 671 401 R.C.S Paris
Settings 37
Pairing procedure
Select
Paired devices/New device.
If the Bluetooth
®
function is not active, the phone prompts you to activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth
®
devices and displays the list. Select the device concerned and validate your
choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.
Enter and validate this code: Your phone is now paired with the remote device.
A connected device is displayed in blue in the list.
[
Options
] on the name of a device lets you access the following options:
-
Delete:
lets you delete the device. WARNING: you need to restart the pairing when this function is used.
-
Rename:
lets you modify the device name.
-
Delete all:
lets you delete all your devices. WARNING: you need to restart the pairing when this function is used.
-
Activate:
used to activate the connection with the device.
-
Deactivate:
used to deactivate the connection with the device.
-
Properties:
used to display the device’s list of Bluetooth
®
services.
Notes:
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
Bluetooth name
This is the name used to identify your phone when it is detected by another Bluetooth
®
device.
USB mode
This menu lets you select a mode for connecting the phone to a PC using a USB cable available as an accessory:
At Plugging-in
If you select this option, on connecting a USB cable the phone will prompt you to select the required mode.
Modem
This mode is a communication mode between the phone and a PC. It is used to exchange data (my card, contacts) between
the phone and a PC.
After connecting the USB cable between the phone and the PC, you must use the MPAS software (My Pictures And Sounds
available from www.planetsagem.com) or the Wellphone software (available from www.wellphone.com).
PictBridge
This mode lets you connect the phone to a printer (and print photos) without using a PC.