User's Manual
Table Of Contents
- OBJECT
- TRACE FUNCTIONS
- TRACE MENU
- UPDATE OF THE TRACED INFORMATION
- MS INFO
- NETWORK
- SERVING CELL Main screen in IDLE mode
- SERVING CELL Second screen in IDLE mode
- NEIGHBOURING CELL Main screen in IDLE mode
- NEIGHBOURING CELL Second screen in IDLE mode
- SERVING CELL screen in DEDICATED mode
- NEIGHBOURING CELL screen in DEDICATED mode
- SERVING CELL Main screen in PBCCH mode
- SERVING CELL Second screen in PBCCH mode
- NEIGHBOURING CELL first screen in PBCCH mode
- NEIGHBOURING CELL Second screen in PBCCH mode
- TCH Hopping features in Dedicated mode
- PBCCH frequency screens in PBCCH mode with hopping
- PBCCH frequency screens without hopping
- Network summary screen
- GPRS INFO
- SIM INFO
- FORCING FUNCTIONS
- BCCH SCANNING
- QOS INFO
- SERIAL LINK SETUP
- RF SCANNING IN PROGRESS SCREEN
- SWITCHING BETWEEN WAP BROWSER AND TRACE SCREENS
- ANNEX: GPRS QOS PARAMETERS DEFINITION
s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 8 / 52
2. TRACE FUNCTIONS
2.1 TRACE MENU
The trace menu MINFO is accessible with Menu # (scroll push-buttons:
∧
∧∧
∧
or
∨
∨∨
∨
and #)
Up to 8 choices are available in this menu :
•
1
MS Info
•
2
Network
•
3
GPRS Info
)
•
4
SIM Info
•
5
Forcing Functions
•
6
BCCH Scanning
•
7
QoS Info
•
8
Serial Link Setup
To browse through the successive menus, press the scroll push-buttons:
^
Next menu and
v
Previous
menu.
2.2 UPDATE OF THE TRACED INFORMATION
The traced information are updated in real time at each event by the RHM, for example at the incoming of
PSI or SI. There is also no need of polling from the RHM to the MS.