User's Manual
Table Of Contents
- OBJECT
- TRACE FUNCTIONS
- TRACE MENU
- UPDATE OF THE TRACED INFORMATION
- MS INFO
- NETWORK
- SERVING CELL Main screen in IDLE mode
- SERVING CELL Second screen in IDLE mode
- NEIGHBOURING CELL Main screen in IDLE mode
- NEIGHBOURING CELL Second screen in IDLE mode
- SERVING CELL screen in DEDICATED mode
- NEIGHBOURING CELL screen in DEDICATED mode
- SERVING CELL Main screen in PBCCH mode
- SERVING CELL Second screen in PBCCH mode
- NEIGHBOURING CELL first screen in PBCCH mode
- NEIGHBOURING CELL Second screen in PBCCH mode
- TCH Hopping features in Dedicated mode
- PBCCH frequency screens in PBCCH mode with hopping
- PBCCH frequency screens without hopping
- Network summary screen
- GPRS INFO
- SIM INFO
- FORCING FUNCTIONS
- BCCH SCANNING
- QOS INFO
- SERIAL LINK SETUP
- RF SCANNING IN PROGRESS SCREEN
- SWITCHING BETWEEN WAP BROWSER AND TRACE SCREENS
- ANNEX: GPRS QOS PARAMETERS DEFINITION
s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 6 / 52
1. OBJECT
1.1 INTRODUCTION.
The purpose of this document is to define the MMI (Machine-Man Interface) Trace specification for the OT
product line, some feature depends on the mobile .
For each category of the trace menu, this document describes, with graphical examples, the possible
choices that are offered to the user, along with the keypad controls used to browse through the successive
screens, to enter parameters and to modify the settings. The available categories are as follow:
•
MS Info: gives information related to the Mobile Station,
•
Network Info: displays various parameters concerning the serving and neighbouring cells,
•
GPRS Info
(only available with OT supporting GPRS )
: displays parameters related to packet data
service,
•
SIM Info: allows to monitor or modify information stored in the SIM,
•
Forcing Functions: these functions allow to manually modify the behavior of the mobile and of the
network,
•
BCCH Scanning: performs RF power measurements on the whole band and searches for BCCH
channels,
•
QoS Info: displays parameters related to the provided Quality of Service,
•
Serial Link Setup: sets up the serial link parameters.
Please note that the screens presented in this document are not contractual.
1.2 REFERENCE ELEMENTS
[03.64] : Serial link trace interface specification for trace mobile M42 (OT M42 STB 004E)
[03.64] : Digital cellular telecommunications system (Phase 2+) ; General Packet Radio Service (GPRS) ; Overall
Description of the GPRS radio interface ; Stage 2 (Release 1997)
[04.04] : Digital cellular telecommunications system (Phase 2+) ; Layer 1 ; General requirements (Release 1997)
[04.07] : Digital cellular telecommunications system (Phase 2+) ; Mobile radio interface signalling layer 3 ;
General aspects (Release 1997)
[04.08] : Digital cellular telecommunications system (Phase 2+) ; Mobile radio interface layer 3 specification
(Release 1997)