User's Manual
Table Of Contents
- OBJECT
- TRACE FUNCTIONS
- TRACE MENU
- UPDATE OF THE TRACED INFORMATION
- MS INFO
- NETWORK
- SERVING CELL Main screen in IDLE mode
- SERVING CELL Second screen in IDLE mode
- NEIGHBOURING CELL Main screen in IDLE mode
- NEIGHBOURING CELL Second screen in IDLE mode
- SERVING CELL screen in DEDICATED mode
- NEIGHBOURING CELL screen in DEDICATED mode
- SERVING CELL Main screen in PBCCH mode
- SERVING CELL Second screen in PBCCH mode
- NEIGHBOURING CELL first screen in PBCCH mode
- NEIGHBOURING CELL Second screen in PBCCH mode
- TCH Hopping features in Dedicated mode
- PBCCH frequency screens in PBCCH mode with hopping
- PBCCH frequency screens without hopping
- Network summary screen
- GPRS INFO
- SIM INFO
- FORCING FUNCTIONS
- BCCH SCANNING
- QOS INFO
- SERIAL LINK SETUP
- RF SCANNING IN PROGRESS SCREEN
- SWITCHING BETWEEN WAP BROWSER AND TRACE SCREENS
- ANNEX: GPRS QOS PARAMETERS DEFINITION
s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 45 / 52
The
C
button (or the left one-touch button) cancels the digit entered previously brings back to the
beginning channel screen for results display (see 2.8.4).
2.9 QOS INFO
This menu contains 4 entries:
•
FER full
•
T3212
•
Handover Counter
•
EFR
The scroll push-buttons
^
and
v
are used to browse through the menu.
2.9.1 FER full
This function gives the FER (Frame Erasure Rate) in percentage of the speech frames erased over the last
four measurement periods.
When this value is not applicable (for instance in Idle mode), the FER value is replaced by “----“.
The
C
button (or the left one-touch button) brings back to the QoS Info scrolling menu.
2.9.2 T3212
This screen displays the following parameters:
•
max_retrans: the maximum allowed number of retransmissions of a burst over the RACH (Random
Access Channel) is equal to max_retrans. The displayed values are: RACH retransmission counter
value / max_retrans value. See [04.08] for more details.
•
T3212: the T3212 counter indicates the timeout (in decihour) value for the periodic updating. It ranges
from 1 to 255.
Inf
means infinite timeout, i.e. the mobile shall not perform any periodic updating. See
[04.08] for more details.
The
C
button (or the left one-touch button) returns to the QoS Info scroll menu.