User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 40 / 52
2.7.11 Set GPRS Auto Attach
This function allows to specify whether the Mobile Station shall automatically attach to the GPRS network
at power-up or not. When this forcing function is set to OFF, the Mobile Station only attaches upon PDP
Context Activation. The following choices are available:
•
Auto-Attach ON
: the mobile shall attach at power-up
•
Auto-Attach OFF
: the mobile shall not attach at power-up
•
Inactive
: default behaviour
The scroll push-buttons
^
and
v
are used to browse through these choices.
The
OK
button (or the right one-touch button) validates the choice, while the
C
button (or the left one-touch
button) cancels and returns to the Forcing Functions general scrolling menu.
After the validation, the mobile must be powered off and on so that the new setting of the forcing
can be taken into account.
2.7.12 GPRS Multislot Class forcing
This function allows to force the Multislot Capability Class of the Mobile Station. The possible choices are:
•
1
: Class 1 (1+1)
•
2
: Class 2 (2+1)
•
4
: Class 4 (3+1)
•
Inactive
: No Multislot Class forcing (default class)
Use the scroll buttons
^
and
v
to set the GPRS Multislot Class. The
OK
button (or right one-touch button)
validates the choices, whereas the
C
button (or left one-touch button) cancels them.
After the validation, the mobile must be powered off and on so that the new setting of the forcing
can be taken into account.