User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 39 / 52
The
OK
button (or the right one-touch button) validates the choice, while the
C
button (or the left one-touch
button) cancels and returns to the Forcing Functions general scrolling menu.
NOTE
: the Active and Inactive settings of this function can only be chosen in GSM IDLE mode.
2.7.9.2 BCCH channel prompt
If the “Active” choice is validated, a second screen prompts for the BCCH frequency number on which the
mobile shall attempt to camp using the cell re-selection procedure.
The
OK
button (or the right one-touch button) validates the choice and returns back in the Forcing
Functions general scrolling menu, while the
C
button (or the left one-touch button) deletes the previously
entered digit, or cancel the operation if no digit is present and returns to the Forcing Functions general
scrolling menu.
2.7.10 GPRS Downlink Coding Scheme forcing
)
This function allows to force the Coding Scheme for Downlink data transfer. The possible choices are:
•
1
•
2
•
3
(to be tested: no BTS supports already this feature)
•
4
(to be tested: no BTS supports already this feature)
•
N
: No Coding Scheme forcing
Use the scroll buttons
^
and
v
to set the Downlink Coding Scheme. The
OK
button validates the choice,
whereas the
C
button (or left one-touch button) cancels it.