User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 36 / 52
2.7.4 Negative C1
This function allows the mobile to camp on a cell with C1<0. You can browse through the following choices
with the scroll push-buttons
^
and
v
:
•
Active: the mobile shall ignore the C1 criterion
•
Inactive: the mobile shall comply with the GSM recommendations concerning the C1 criterion
The
OK
button (or the right one-touch button) validates the choice, while the
C
button (or the left one-touch
button) cancels and returns to the Forcing Functions general scrolling menu.
2.7.5 Set Power Class
This function allows to force the Power Class of the mobile. The possible choices are:
For GSM:
•
4 (2W or 33dBm, PL5)
•
5 (0.8W or 29 dBm, PL7)
•
N: the mobile shall use its default power class
For DCS:
•
1 (1W or 30dBm, PL0)
•
2 (0.25W or 24dBm, PL3)
•
N: the mobile shall use its default power class
Use the scroll buttons
^
and
v
to set the power class for the GSM frequency band then press the right
one-touch button to go to the next field and set the DCS power class. The
OK
button validates the choices,
whereas the
C
button (or left one-touch button) cancels them.