User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 31 / 52
2.6.3 Loc. Information
This screen allows to modify the Location Information. This 11-byte long parameter is displayed in
hexadecimal form.
The
C
button and the
^
button move the cursor to the left, the
v
button moves the cursor to the right.
The
OK
(or the right one-touch button) validates the changes, while the left one-touch button (or the
C
button if the cursor has reached the left side of the screen) cancels the changes.
2.6.4 BA List
This screen allows to modify the BA List. This parameter is 11-byte long and is displayed in hexadecimal
form. Each bit corresponds to a frequency.
The
C
button and the
^
button move the cursor to the left, the
v
button moves the cursor to the right.
The
OK
(or the right one-touch button) validates the changes, while the left one-touch button (or the
C
button if the cursor has reached the left side of the screen) cancels the changes.
2.6.5 Preferred Networks
2.6.5.1 Display screens
These screens display the preferred networks (up to 32 entries). Each entry is 3-bytes long and is
displayed in hexadecimal form.
To browse through the different preferred networks, use the scroll push-buttons
^
and
v
.
The
C
button (or the left one-touch button) returns to the SIM menu. The
OK
button (or the right one-touch
button) allows to enter the modification screen.