User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 29 / 52
2.5.8 Packet Bursts Info
This screen displays parameters about the format of packet bursts :
•
CTRL
: CONTROL_ACK_TYPE parameter. It can take the following values:
!
4 ACC
: the default format for PACKET CONTROL ACKNOWLEDGMENT messages is 4 access
bursts
!
RLC/MAC
: the default format for PACKET CONTROL ACKNOWLEDGMENT messages is an
RLC/MAC Control Block
•
ACC
: ACCESS_BURST_TYPE parameter.
11
or
8
bits
•
PRIO
: PRIORITY_ACCESS_THR parameter. It can take the following values:
!
N
: packet access not allowed in the cell
!
1
: packet access allowed for priority level 1
!
1-2
: packet access allowed for priority levels 1 and 2
!
1-3
: packet access allowed for priority levels 1 to 3
!
1-4
: packet access allowed for priority levels 1 to 4
2.6 SIM INFO
This menu gives access to information that is stored on the SIM. It contains the following entries:
•
KC information
•
IMSI
•
Loc. information
•
BA List
•
Preferred Networks
•
Prohibited Networks
•
Group ID 1
•
Group ID 2
•
Administration