User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 28 / 52
•
MEAS
: PC_MEAS_CHAN. Indicates the type of channel that shall be used for downlink measurements
for power control. This parameter can take 2 values:
!
BCCH
: the measurements shall be performed on the BCCH
!
PDCH
: the measurements shall be performed on the PDCH
2.5.6 Paging Info without PBCCH
This screen gives information about how paging shall be performed:
•
NMO
: Network Mode of Operation (
I, II or III
)
•
SPLIT
: SPLIT_PG_CYCLE. Ranges from
0
to
352
2.5.7 Paging Info with PBCCH
This screen gives information about how paging shall be performed:
•
NMO
: Network Mode of Operation (
I, II or III
)
•
SPLIT
: SPLIT_PG_CYCLE. Ranges from
0
to
352
•
MODE: "
Normal", "Extended", "reorganisation", "same".
•
PG: 0 to 1023
Current value of the Paging group for the MS.
•
D MAX: 0, 1, 2, 4, 8, 16 ,32 and 64s
Current value of the DRX_TIMER_MAX of the cell.
•
NON D: 0, 1, 2, 4, 8, 16 ,32 and 64s
Current value of the NON_DRX_TIMER negotiated by the MS.