User's Manual
Table Of Contents
- OBJECT
- TRACE FUNCTIONS
- TRACE MENU
- UPDATE OF THE TRACED INFORMATION
- MS INFO
- NETWORK
- SERVING CELL Main screen in IDLE mode
- SERVING CELL Second screen in IDLE mode
- NEIGHBOURING CELL Main screen in IDLE mode
- NEIGHBOURING CELL Second screen in IDLE mode
- SERVING CELL screen in DEDICATED mode
- NEIGHBOURING CELL screen in DEDICATED mode
- SERVING CELL Main screen in PBCCH mode
- SERVING CELL Second screen in PBCCH mode
- NEIGHBOURING CELL first screen in PBCCH mode
- NEIGHBOURING CELL Second screen in PBCCH mode
- TCH Hopping features in Dedicated mode
- PBCCH frequency screens in PBCCH mode with hopping
- PBCCH frequency screens without hopping
- Network summary screen
- GPRS INFO
- SIM INFO
- FORCING FUNCTIONS
- BCCH SCANNING
- QOS INFO
- SERIAL LINK SETUP
- RF SCANNING IN PROGRESS SCREEN
- SWITCHING BETWEEN WAP BROWSER AND TRACE SCREENS
- ANNEX: GPRS QOS PARAMETERS DEFINITION
s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 27 / 52
!
DL
: Downlink RLC throughput
•
Ret
: RLC retransmitted block rate, in
percentage
(only in Acknowledged RLC mode, see 4.2.1 for
more details)
!
UL
: Uplink RLC retransmitted block rate
!
DL
: Downlink RLC retransmitted block rate
•
Tot
: total RLC blocks transmitted (see 4.2.3 for more details)
!
UL
: total Uplink RLC blocks transmitted
!
DL
: total Downlink RLC blocks transmitted
2.5.4 Ciphering Info
This screen displays parameters related to GPRS ciphering:
•
GEA
: indicates whether the GPRS Encryption Algorithm 1 is used or not
!
1
: GPRS Encryption Algorithm 1 used
!
No
: no GPRS Encryption Algorithm used
•
Kc
: Ciphering Key. Coded on
8
bytes
, displayed in hexadecimal
•
KcSN
: Ciphering Key Sequence Number. Coded on
3 bits
, displayed in decimal
2.5.5 Measurement Info
This screen gives information about parameters measured by the MS:
•
CVAL
: C_VALUE parameter.
in dBm
•
SVAR
: SIGN_VAR parameter.
0 to 15.75 dB², by steps of 0.25 dB²
•
RXQ
: RXQUAL. Coded from
0 to 7
, as specified in [05.08]
•
BLER
: Block Error Rate. This parameter indicates the Block Error Rate of the radio connection.
in
percentage
(see 4.3 for more details)
•
PWR
: MS Output Power. This parameter is encoded as specified in [05.05]