User's Manual
Table Of Contents
- OBJECT
- TRACE FUNCTIONS
- TRACE MENU
- UPDATE OF THE TRACED INFORMATION
- MS INFO
- NETWORK
- SERVING CELL Main screen in IDLE mode
- SERVING CELL Second screen in IDLE mode
- NEIGHBOURING CELL Main screen in IDLE mode
- NEIGHBOURING CELL Second screen in IDLE mode
- SERVING CELL screen in DEDICATED mode
- NEIGHBOURING CELL screen in DEDICATED mode
- SERVING CELL Main screen in PBCCH mode
- SERVING CELL Second screen in PBCCH mode
- NEIGHBOURING CELL first screen in PBCCH mode
- NEIGHBOURING CELL Second screen in PBCCH mode
- TCH Hopping features in Dedicated mode
- PBCCH frequency screens in PBCCH mode with hopping
- PBCCH frequency screens without hopping
- Network summary screen
- GPRS INFO
- SIM INFO
- FORCING FUNCTIONS
- BCCH SCANNING
- QOS INFO
- SERIAL LINK SETUP
- RF SCANNING IN PROGRESS SCREEN
- SWITCHING BETWEEN WAP BROWSER AND TRACE SCREENS
- ANNEX: GPRS QOS PARAMETERS DEFINITION
s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 23 / 52
2.5.1 Mobility Info
This screen gives information related to mobility:
•
Atch
: Attach State
!
N
: not GPRS-attached
!
I
: GPRS-attached while IMSI attached
!
C
: combined-attached
!
G
: GPRS only attached
!
•
GMM
: GMM Service State
!
SB
: Stand-By
!
I
: Idle
!
R
: Ready
•
PTMSI
: Packet Temporary Mobile Station Identifier. Coded on 4 bytes, displayed in hexadecimal
•
TLLI
: Temporary Link Level Identifier. Coded on 4 bytes, displayed in hexadecimal
•
RAC
: Routing Area Code. Coded on 1 byte, displayed in hexadecimal
•
NC
: Network Control Order
!
NC0
: MS controlled cell re-selection, no measurement reporting
!
NC1
: MS controlled cell re-selection, MS sends measurement reports
!
NC2
: Network controlled cell re-selection, MS sends measurement reports
•
T3314
: value of the GMM READY timer.
0 to 11160 s