User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 17 / 52
- RA COL: 0 to 7
Current value of RA Color for the serving Cell. Only valid if the Cell supports GPRS.
2.4.9 NEIGHBOURING CELL first screen in PBCCH mode
The following screens of the NETWORK function give the values of parameters received from the PBCCH of the
six neighbours cells.
The information concerning a neighbour cell is displayed on two screens :
•
First screen description:
- NEIGHBOURING CELL 1 to 6
Current order number of the cell in the list of neighbours.
- GPRS:
"n=No"
: No GPRS Information
"BCCH":
GPRS but no PBCCH detected
"GPRS PBCCH":
GPRS with a PBCCH.
- PBCCH :
BCCH (channel number) of the cell.
-
QBO: +hijk
Quarter Bit Offset: finer complementary offset expressed in number of quarter bit between the
neighbouring cell and the serving cell.
- FN : +abcdefg
Frame offset between the neighbouring cell and the serving cell.
- RX : -110 to -11 dBm
Current value of RX_LEV_NCELL for the BCCH or PBCCH of the cell in dBm.
- RM : -110 to -46 dBm
Current value of GPRS_RX_LEV_ACCESS_MIN for the cell in dBm, if the cell has a PBCCH.
Else current value of RX_LEV_ACCESS_MIN.
- TX
:
Current value of GPRS_MS_TXPWR_MAX_CCH for the neighbouring cell, if the cell has a
PBCCH. Else current value of MS_TXPWR_MAX_CCH.
- BSIC : ab
Current value of the BSIC (Base Station Identity Code) for the neighbouring cell:
a0
to
7
Digit corresponding to the Mobile Coutry Code (MCC).
b0
to
7
Digit corresponding to the Mobile Network Code (MNC).
- C1 : -92 to 127
Current value of the criterion C1 for the cell.