User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 15 / 52
- FN : +abcdefg
Frame offset between the neighbouring cell and the serving cell.
- BSIC : ab
Current value of the BSIC (Base Station Identity Code) for the neighbouring cell:
a0
to
7
Digit corresponding to the operator code.
b0
to
7
Digit corresponding to the cell colour code.
- QBO: +hijk
Quarter Bit Offset : finer complementary offset expressed in number of quarter bit between the
neighbouring cell and the serving cell.
- RX : -110
to
-11 dBm
Current value of RX_LEV_NCELL for the BCCH of the neighbouring cell in dBm.
2.4.7 SERVING CELL Main screen in PBCCH mode
This screen displays synthetically the values of the main parameters received from the network, concerning the
serving cell:
- BCCH :
BCCH channel number..
- MODE : Trans or Idle
'Trans' if the MS
trans
fers data through the GPRS. Else Idle mode
- BSIC : ab
Current value of the BSIC (Base Station Identity Code) for the serving cell:
a0
to
7
Digit corresponding to the Network Color Code.
b0
to
7
Digit corresponding to the Base Color code.
- TX :
Current value of GPRS_MS_TXPWR_MAX_CCH for the serving cell.
-
cd/md
Downlink signalling counter indicator with :
cd : current downlink signalling counter
md : maximum downlink signalling counter
- RX : -110 to -11 dBm
Current value of RX_LEV_SERVING_CELL for the PBCCH of the serving cell.
- RM : -110 to -46 dBm
Current value of GPRS_RX_LEV_ACCES_MIN for the serving cell in dBm.
- LAI : abc de fghij
Current value of the Location Area Identity: