User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 14 / 52
Current value of the BSIC (Base Station Identity Code) for the serving cell:
a0
to
7
Digit corresponding to the Network Colour Code (NCC).
b0
to
7
Digit corresponding to the Base Colour Code (BCC).
- PL :
Current value of the POWER_LEVEL.
- cr/mr
Radio link timeout indicator :
cr
: current radio link timeout
mr
: maximum radio link timeout.
- RX : -110
to
-11 dBm
Current value of RX_LEV_SERVING_CELL for the TCH of the serving cell in dBm.
- RQ : 0
to
7
Current value of the RX_QUAL.
- SD/TC
Type of current channel.
When establishing the call, SDCCH/8 or 4 is displayed for a short time to indicate that the current
channel is the SDCCH/8 or 4. Then is displayed e TCHF or TCHH depending on the coding rate
(FR or HR).
-
RXBCCH
:
-110
to
-11
Current value of RX_LEV_SERVING_CELL for the BCCH of the serving cell during a call in dBm.
- CI : abcde
Current value of the CI (Cell Identity) on 5 decimal digits.
-
RFBCCH
:
BCCH ARFCN (channel number) used for the current cell.
2.4.6 NEIGHBOURING CELL screen in DEDICATED mode
The six following screens of the NETWORK function give the values of the main parameters on measurement
reports.
The information concerning a neighbouring cell is displayed on the following screen. The
icon indicates that
the mobile is in dedicated mode.
- NEIGHBOURING CELL 1
to
6
Current order number of the cell in the list of neighbours.
- CH : 1
to
124
RF BCCH channel number (CHANNEL) of the neighbouring cell.