User's Manual

s
E
Ref. : SCT TMO LOG SPEC
163
Revision : B
Sec. Ref. :
Date : 2003-01-22
E. CONFIDENTIAL All rights of reproduction and disclosure reserved.
Page 12 / 52
2.4.3 NEIGHBOURING CELL Main screen in IDLE mode
The six following screens of the NETWORK function give the values of the main parameters received from the
BCCH of the six neighbouring cells.
The information concerning a neighbouring cell is displayed on one screen :
- NEIGHBOURING CELL 1 to 6
Current order number of the cell in the list of neighbours.
- BCCH :
BCCH ARFCN (channel number) of the neighbouring cell.
- FN : +abcdefg
Frame offset between the neighbouring cell and the serving cell.
- BSIC : ab
Current value of the BSIC (Base Station Identity Code) for the neighbouring cell:
a0
to
7
Digit corresponding to the Network Colour Code (NCC).
b0
to
7
Digit corresponding to the Base Colour Code (BCC).
- TX
:
Current value of MS_TXPWR_MAX_CCH for the neighbouring cell.
- RX : -110 to -11 dBm
Current value of RX_LEV_NCELL for the BCCH of the neighbouring cell in dBm.
- RM : -110 to -46 dBm
Current value of RX_LEV_ACCESS_MIN for the neighbouring cell in dBm.
- C1 : -92 to 127
Current value of the criterion C1 for the neighbouring cell.
- C2 : -92 to 127
Current value of the cell reselection criterion C2 for the neighbouring cell if the network allows to
calculate it.
- RM : -110 to -46 dBm
Current value of RX_LEV_ACCESS_MIN for the neighbouring cell in dBm.
- QBO: +hijk
Quarter Bit Offset: finer complementary offset expressed in number of quarter bit between the
neighbouring cell and the serving cell.