User's Manual

34 Connection functions
Mode
With this menu you can, on the one hand, activate and deactivate the Bluetooth
®
function and, on the other, when the
Bluetooth
®
function is activated, select whether you want other Bluetooth
®
devices to be able to detect your device.
• Off : the Bluetooth
®
function is not available.
• On and hidden : your phone is not visible. It cannot be detected by other Bluetooth
®
devices. In this mode, a device
can only connect to your phone using Bluetooth
®
if you have already paired it. This mode lets you detect other devices
and pair with them from your phone.
• On and visible for 3 minutes : your phone is visible for a period of 3 minutes. During this period, it can be detected by
the other Bluetooth
®
devices. Select this mode when a pairing with your phone has been initiated from another
Bluetooth
®
device.
• On and visible : your phone is visible and can be detected by the other Bluetooth
®
devices as long as this mode is
selected.
IMPORTANT :
- The Off option ensures the best battery life for your phone.
- Bluetooth
®
security is better guarded because your phone remains invisible to the other devices.
Pairing procedure
Select My devices/New device .
If the Bluetooth
®
function is not active, the phone prompts you to activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth
®
devices and displays the list. Select the device concerned and validate your
choice. Your phone then prompts you to enter a code which must be the same as the code entered on the remote device.
Enter and validate this code: Your phone is now paired with the remote device.
A connected device is shown in blue in the list.
[
Options ] on the name of a device lets you access the following options:
- Delete : this is used to delete the device. WARNING: using this function needs starting the pairing over again.
- Rename : this is used to modify the name of the device.
-
Delete all : this is used to delete all your devices. WARNING: using this function needs starting the pairing over again.
- Activate : this is used to activate the connection with the device (this step is necessary after the pairing operation).
- Deactivate : this is used to deactivate the connection with the device.
Notes :
- Refer to the user manual of the device with which you are pairing to find out how to set this device to the mode allowing
this operation.
- The code of the remote device may be predefined by the device manufacturer. In this case, refer to the user manual of this
device to find out this code.
Agrément_my730C FCC_en.book Page 34 Mardi, 3. juin 2008 4:22 16