User's Manual

Quick start 13
Inserting the memory card
- Turn the phone back and remove the back cover.
- Insert the memory card pushing it until it clicks into place.
- To remove the card, first make sure that no application is accessing the card,
then slightly push the top edge of the card to release it and pull it out of the slot.
- Place the back cover.
.
Getting started
When you switch on your phone for the first time, follow instructions displayed on the screen.
If access to the SIM card is protected, the device prompts you to enter the PIN number:
Enter the code
between 4 and 8 digits given to you when the SIM card was issued. These digits do not appear on the screen
for security reasons.
After pressing [
OK ], the phone activates the SIM card settings and switches on again if necessary (depending on the SIM
card).
If there are contacts saved in your SIM card, you are invited, if you wish, to copy them in the phone contacts memory.
WARNING
The memory card is very fragile. Take care when you insert or remove the memory card.
The memory card can be inserted or withdrawn while the phone is in use. However, it may suffer damage if withdrawn
during a read or write operation. Ensure that no application accesses the card during its withdrawal.
Some memory cards must be formatted with a PC before first use with the phone.
Warning
If a wrong PIN number is entered three times in succession, your SIM card is blocked. You must then:
- Enter the PUK (Personal Unblocking Key) code provided by your operator, and validate.
- Enter your PIN number and validate.
- Enter your PIN number again and validate.
After 5 or 10 failed attempts (depending on the type of SIM card), the SIM card is definitely locked. You must then
contact your operator to obtain a new card.
Agrément_my730C FCC_en.book Page 13 Mardi, 3. juin 2008 4:22 16