Installation Guide
Table Of Contents
- MA500 Series
- INTRODUCTION
- SAFETY INSTRUCTIONS
- GENERAL DESCRIPTION
- MA5XX VERSIONS INSTALLATION PROCEDURE
- OMA5XX VERSIONS INSTALLATION PROCEDURE
- ELECTRICAL INTERFACE
- USER INTERFACE
- MORPHOACCESSTM MA5XX SERIES TECHNICAL CHARACTERISTICS
- Recommendations
- APPENDIX 1 - FINGERPRINT PLACEMENT RULES
- APPENDIX 2 – RELATED DOCUMENTS
- APPENDIX 3 - DRILLING TEMPLATE
- SUPPORT
P
P
o
o
w
w
e
e
r
r
S
S
u
u
p
p
p
p
l
l
y
y
s
s
o
o
u
u
r
r
c
c
e
e
MA5xx OMA5xx
Power cable
1 Block 1 +12V In Positive 12 Volts, power supply. Red
2 Block 2
GND/ALIM
In Ground power supply. Black
Ground
In Ground security reference yellow/green
Power supply:
Must conform to CEE/EEC EN60950 standard
9V to 16 Volts ± 5% (regulated) 1,5 Amp max ( peak )
Power may come from a 12 Volts Wiegand power supply, conforming to the
Security Industry Association's Wiegand standard March 1995 , able to deliver
9 Watts.
In standard operating activity, typical power consumption is 4,5 Watts.
In extreme temperature conditions, with all options ( USB key , 12V output for
Wiegand in ), maximum power consumption is up to 9 Watts.
MA5xx terminal make use of POE functionality ; If Ethernet network is POE
compatible, power supply may come from Ethernet wiring.
For systems placed in other building than supervisor one's, the electrical
security is guaranteed with a "ground connection" to the terminal.
For a higher susceptibility level, we recommend to the installer to connect a
"ground connection" to the terminal.
MA5xx : A cable terminal connected to "ground security reference" must be
tied to the fixation designed for ( see p 16 ).
OMA5xx : the yellow/green wire in power supply cable must be connected to
"ground security reference".
18
SAGEM Sécurité document. Reproduction and disclosure forbidden. SK-53018-03