User's Manual

58 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

Setting up Ethernet Link parameters

You can use the Ethernet port to send the corresponding ID to the

central security controller. Connection should be made using port

11020.

Those configuration keys can be defined from the CONFIG menu

in file /cfg/Maccess, in section Ethernet.

Parameters Value Comment

− Wiegand IN/

DataClock OUT: card

present (priority goes to

dataclock out)

− Wiegand IN/

Wiegand OUT: led out

− DataClock IN/

Wiegand OUT: inactive

Led out/Card present

(con’t)

1 Force Led out

The led out signal only

behaves as a led out sig-

nal.

Led in 0 (default value) Active

The led in signal is

ignored.

1 Inactive

The MorphoAccess

led

is driven by the led in sig-

nal:

led in = 0 =>led is green

led in = 1 => led is off

manuel.book Page 58 Vendredi, 30. mai 2003 12:21 12