User's Manual

26 SAGEM SA document. Reproduction and disclosure forbidden. SE32/03-011145-01

If the identification is successful, the terminal triggers the access

or returns the corresponding ID to central security controller.

Once the person’s identification is done, the terminal automatically

loops back, selects base 0 and waits for a new finger. This display

remains for about 4 seconds.

Access control by authentication (MorphoAccess™ 200

and 300)

To configure the MorphoAccess™ in this mode, use Asystem and

edit /cfg/Maccess/Admin/mode, then enter 1.

This mode requires a peripheral equipment which will send the ID

of the person to authenticate to the MorphoAccess™ Wiegand or

Dataclock input.

Place your finger

for identification

Please

Place your finger

for identification

Please

Key 3 pressed

Now using base 15

Now using base 0

because base 53

cannot be selected

Welcome

92716

IDENTIFIED

✔✔

✔

manuel.book Page 26 Vendredi, 30. mai 2003 12:21 12