User's Manual

Contents

FCC Compliance of MorphoAccess™ 200, 220, 300, 200E, 220E, and 300E ......................3

Installing Ferrite Beads on Interface Cables for MorphoAccess™ 200 and 300 ....................3

Installing Ferrite Beads on Interface Cables for MorphoAccess™ 220 ..................................5

MorphoAccess™ Motherboard Jumper Configuration............................................................7

MorphoAccess™ Serial Port is RS-422 Only .........................................................................8

Ethernet Connections to MorphoAccess™.............................................................................8

MorphoAccess™ 300 Memory Extension Board....................................................................8

MorphoAccess™ Power Supply Selection Outside the United States....................................8

MorphoAccess Installation Guide Update  SAGEM MORPHO, Inc. 2003. All Rights

Reserved.

This manual, as well as the software described in it, is furnished under license and may be

used or copied only in accordance with the terms of such license. The content of this

manual is furnished for informational use only, is subject to change without notice, and

should not be construed as a commitment by SAGEM MORPHO, Inc. SAGEM MORPHO, Inc.

assumes no responsibility or liability for errors or inaccuracies that may appear in this

documentation, and it is furnished “AS IS,” with no warranties of any kind, express or

implied. Except as may be permitted by the license, no part of this manual may be

reproduced, stored in a retrieval system, or transmitted in any form or by any means,

without the prior written permission of SAGEM MORPHO, Inc.

“SAGEM,” “MORPHO,” and the SAGEM logo are U.S. registered trademarks of SAGEM SA.

All other product and company names which may be referenced herein are trademarks or

servicemarks of their respective owners.

MorphoAccess Terminal Installation Guide Update, Document M142-005C

SAGEM MORPHO, Inc., 1145 Broadway Plaza, Tacoma, WA 98402 USA

September 2003