User's Manual

Electrical Interfaces

Terminal block board

For EMC compatibility: To be EC and FCC compliant (EN55022, EN55024

FCC part 15), each interface cable and 12V power supply cable must be

threaded and wrapped through an axial ferrite bead.

J1 5 pin block Ethernet Interface (LAN 10Mbps)

J3 2 pin block 12 V supply ± 5% regulated

J4 4 pin block Wiegand output to host or Data Clock output

J5 5 pin block Wiegand peripheral input or Data Clock output

J7 5 pin block COM1 RS485/422 serial interface

J8 7 pin block Output relay and Tamper-Switch

J11 5 pin block COM2 reduced RS232C serial interface

J9 34 way ribbon cable Connection to main assembly

F1 Fuse 2.5 A quick blow fuse

J2 9 pin block COM2 full RS232C serial interface (optional)

J6 7 pin block 6 input/output 5 V TTL interface (optional)

J10 20 way interconnection Connection to main assembly (optional)

J11 5 pin block RS422 serial interface (optional)

For more information, please contact SAGEM MORPHO, Inc..

Electrical interfaces

2.5 A minimum