Installation Guide

SK-0000034370-01 SAGEM Défense Sécurité document. Reproduction and disclosure forbidden.
15
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16
Pin 1 TR- / D1 Out Wiegand D1 or RS485 TX/RX- or CLK
Pin 2 TR+ / D0 Out Wiegand D0 or RS485 TX/RX+ or Data
Pin 3 LED1 In Wiegand LED1
Pin 4 LED2 In Wiegand LED2
Pin 5 GND Ground for Wiegand / RS485 / Dataclock
Pin 6 Relay C0 Contact Relay 0
Pin 7 Relay C1 Contact Relay 1
Pin 8 TSW0 Tamper switch Contact 0
Pin 9 TSW1 Tamper switch Contact 1
Pin 10 GND Ground for Ethernet Interface (LAN 10/100 Mbps)
Pin 11 RX- Receive negative Ethernet
Pin 12 RX+ Receive positive Ethernet
Pin 13 TX- Transmit negative Ethernet
Pin 14 TX+ Transmit positive Ethernet
Pin 15 +12V Positive 12 Volts , power supply.
Pin 16 GND Ground power supply.
USB