User's Manual
Table Of Contents
- Introduction
- The sixbasic menus
- Scope of delivery
- An initial overview
- Initial operation
- Making calls, receiving calls, mailbox query, emergency calls
- Navigation
- Your contacts
- Log
- Settings
- Ringer Settings
- Selecting ring tone
- Setting an alarm
- Display own number
- Activating your Top 3 contacts
- SIM Backup
- Activating keypad tones
- Entering the time and date
- Language settings
- Voicemail number
- Activating and deactivating Caller ID display to other users during a call
- Activating Call Divert
- Activating the Call Waiting function
- Barring Calls
- Activating power saving mode
- Contrast
- Security
- Activating the area info display
- Network selection
- Restoring all settings
- SIM Services
- The mobile phone cradle
- Connecting the mobile phone to your PC
- Troubleshooting
- Index Alarm55Area info67Automatic redial21Battery78Battery charging78Blocking calls63Call barring64Call divert61, 62, 63Call Waiting63calls17, 18, 20, 21, 22, 26, 35, 37, 38, 39, 41, 61, 71, 79, 80Charging the battery17Contacts26, 28, 42Cradle69Create38,
- Care and safety information
- Warranty
- Conformance Document
- End User Licence Agreement (EULA), for the software
- Technical Specifications
- Glossary of terms
10.15 Activating power saving mode
To extend the battery run time on your mobile phone, you can activate Power saving
mode. In this mode, the time for which the display is illuminated is reduced. To do
this, under "Settings", go to the menu item "Power Saving" and select this with the
left menu key. Then switch the mode on and confirm your selection with the left menu
key.
Please note: the battery run time on your mobile phone can also be optimised by
taking the following precautionary measures: when storing your mobile phone,
ensure that the keys cannot be pressed inadvertently. This is important, since every
time the keys are pressed, the display is illuminated. Also make sure that you are not
covering the aerial with your fingers when using the phone.
10.16 Contrast
You can modify the contrast level of the screen. Under "Settings", go to the menu
item "Contrast" and choose a contrast level. Confirm your selection with the left menu
key.
65