User's Manual
Table Of Contents
- Introduction
- The sixbasic menus
- Scope of delivery
- An initial overview
- Initial operation
- Making calls, receiving calls, mailbox query, emergency calls
- Navigation
- Your contacts
- Log
- Settings
- Ringer Settings
- Selecting ring tone
- Setting an alarm
- Display own number
- Activating your Top 3 contacts
- SIM Backup
- Activating keypad tones
- Entering the time and date
- Language settings
- Voicemail number
- Activating and deactivating Caller ID display to other users during a call
- Activating Call Divert
- Activating the Call Waiting function
- Barring Calls
- Activating power saving mode
- Contrast
- Security
- Activating the area info display
- Network selection
- Restoring all settings
- SIM Services
- The mobile phone cradle
- Connecting the mobile phone to your PC
- Troubleshooting
- Index Alarm55Area info67Automatic redial21Battery78Battery charging78Blocking calls63Call barring64Call divert61, 62, 63Call Waiting63calls17, 18, 20, 21, 22, 26, 35, 37, 38, 39, 41, 61, 71, 79, 80Charging the battery17Contacts26, 28, 42Cradle69Create38,
- Care and safety information
- Warranty
- Conformance Document
- End User Licence Agreement (EULA), for the software
- Technical Specifications
- Glossary of terms
10.8 Entering the time and date
Under "Settings", go to the menu item "Time & Date", then you can set the time, the
format in which the time is shown, set the date and select to display or not the date
on the home screen.
Under the menu item "Set Time", you can enter the current time. With the "Clear"
key, you can completely reset the time. Confirm your entry with "OK".
Please note: if the time is set to the 12-hour format, you can only enter hours from
1-12. Under the menu item "Time Format", you can switch between the 12-hour and
the 24-hour format. The current setting is indicated by a check mark.
Under the menu item "Set Date", you can enter the current date. Confirm your entry
with „OK".
59