User's Manual
Table Of Contents
- Contents
- Description
- 1 Open the back cover using the notch located at the bottom of the phone. Take out battery if already installed.
- 2 Open the metallic lock, slide the SIM card into the card holder with fold face down and cut corner, close the metallic lock.
- 3 Place the battery by positioning first the bottom of it, as shown on the battery.
- 4 Place the back cover, clicking in first the upper part then the lower part.
- Idle Screen
- Quick start
- Using your phone
- Phonebook
- Messages
- Camera
- My Documents
- Music
- WAP
- Games and Tools
- Settings
- Time Manager
- Technical features
- Certification and safety information for the United States and countries using FCC standards
- Certification and safety information for Europe and countries using CE standards
- For customers in the United States
- For customers outside the United States
- End User Licence Agreement (EULA), for the software
- JAVATM
- Troubleshooting
- Index
For customers outside the United States
83
Faulty parts to be replaced during a repair under warranty will
become the property of Sagem Mobiles.
The phone repair and standstill time during the warranty period may
not lead to an extension of the warranty period as stated in article 1
above, provided no other vital provisions have been agreed.
The application of the warranty is subject to the full payment of the
sums due for the phone when the request for support is made.
4.
The following are excluded from the warranty:
Breakdowns or malfunctions due to non-compliance with the
installation and use instructions, to an external cause of the phone
(shock, lightning, fire, vandalism, malice, water damage of any type,
contact with various liquids or any harmful agent, unsuitable electric
current...), to modifications of the phone made without the written
consent of Sagem Mobiles, to a servicing fault, as described in the
documentation supplied with the phone, to lack of supervision or
care, to poor environmental conditions of the phone (especially
temperature and hygrometry, effects of variations in electric voltage,
interference from the mains network or earth) or even due to a
repair, a call-out (opening or trying to open the phone) or to
servicing done by personnel not approved by Sagem Mobiles.
Damage resulting from inadequate packaging and/or poor packing
of the phone sent back to Sagem Mobiles.
Normal wear and tear of the phone and accessories.
Communication problems linked with a poor environment,
especially:
Problems accessing and/or logging onto the Internet, such as
breakdowns of the access network, the failure of the subscriber's or
his correspondent's line, transmission fault (poor geographic
coverage by radio transmitters, interference, disturbance, fai-lure or
poor quality of phone lines...), a fault inherent to the local network
(cabling, file server, user phone) and/or transmission network fault
(interference, disturbance, failure or poor quality of the network...).
Change of parameters of the cellular network made after the phone
was sold.
Supply of new software versions.
287244723_my421Z FCC_EN.book Page 83 Wednesday, September 3, 2008 1