User's Manual
Table Of Contents
- Contents
- Description
- 1 Open the back cover using the notch located at the bottom of the phone. Take out battery if already installed.
- 2 Open the metallic lock, slide the SIM card into the card holder with fold face down and cut corner, close the metallic lock.
- 3 Place the battery by positioning first the bottom of it, as shown on the battery.
- 4 Place the back cover, clicking in first the upper part then the lower part.
- Idle Screen
- Quick start
- Using your phone
- Phonebook
- Messages
- Camera
- My Documents
- Music
- WAP
- Games and Tools
- Settings
- Time Manager
- Technical features
- Certification and safety information for the United States and countries using FCC standards
- Certification and safety information for Europe and countries using CE standards
- For customers in the United States
- For customers outside the United States
- End User Licence Agreement (EULA), for the software
- JAVATM
- Troubleshooting
- Index
Settings
47
-
On & visible
: Your phone is visible for a period of 3 minutes.
During this period, it can be detected by the other Bluetooth
®
devices. Select this mode when a pairing with your phone has
been initiated from another Bluetooth
®
device.
-
On & always
: Your phone is visible and can be detected by the
other Bluetooth
®
devices as long as this mode is selected.
-
Off
: The Bluetooth
®
function is not available.
IMPORTANT:
- The
Off
option ensures the best battery life for your phone.
- Bluetooth
®
security is better guarded because your phone
remains invisible to the other devices.
Paired devices
This menu lets you draw up the list of devices with which the
Bluetooth
®
connection is secure (by authentication and encryption).
A device must be added to this list before it can be used in
Bluetooth
®
with your phone except for exchanging objects. When
you select send by Bluetooth
®
(photo, Todo task, contact details,
etc.) the phone displays the list of devices. You do not need to
select a device from this list at this time, you can start a one-off
search for a device when you initiate sending.
See below for the pairing procedure.
Pairing procedure
Select
Paired devices/New Device
.
If the Bluetooth
®
function is not active, the phone prompts you to
activate it using one of the 3 modes described above.
The phone searches for visible Bluetooth
®
devices and displays the
list. Select the device concerned and validate your choice. Your
phone then prompts you to enter a code which must be the same as
the code entered on the remote device. Enter and validate this
code: Your phone is now paired with the remote device.
A connected device is shown in bold in the list.
[
Options
] on the name of a device lets you access the following
options:
-
Delete
: This is used to delete the device. WARNING: using this
function needs starting the pairing over again.
-
Rename
: This is used to modify the name of the device.
287244723_my421Z FCC_EN.book Page 47 Wednesday, September 3, 2008 1